Pentax K-70 + DA 18-50mm RE + 50-200mm WR Kit

Main info

  • 24.2 megapixel APS-C CMOS sensor
  • In-body image stabilization
  • Sensor sensitivity up to ISO 204 800
  • FullHD 1920 × 1080 60i/50i video recording
  • Weather-resistant construction

Product has been archived

Pentax K-70 + DA 18-50mm RE + 50-200mm WR Kit Pentax K-70 + DA 18-50mm RE + 50-200mm WR Kit
Pentax K-70 body
+ HD Pentax DA 18-50mm f/4.0-5.6 DC WR RE lens
+ smc Pentax DA 50-200mm f/4-5.6 AL WR lens

24.24 MP APS-C CMOS sensor and PRIME MII image processor

A 24.24MP APS-C CMOS sensor pairs with the PRIME MII image processor to realize clean, high-resolution still image quality, a sensitivity range of ISO 100-204800, and the ability to record Full HD 1080p video. The processor and sensor combination also affords a range of continuous shooting capabilities, including a 6 fps shooting rate for up to 40 consecutive JPEGs, 10 RAW/DNG frames, or 8 RAW+JPEG exposures.

Selectable Anti-Aliasing Filter
The PENTAX K-70’s AA-filter-free design eliminates the AA (anti-aliasing) filter, which has an adverse effect on the camera’s resolving power. This design optimizes the resolving power of the approximately 24.24 effective megapixels provided by the high-resolution APS-C-size CMOS image sensor, while assuring high-speed readout of rich-gradation, 14-bit image data.

Sensor-Shift Type Shake Reduction and Pixel Shift Resolution
In-camera sensor-shift type Shake Reduction (SR) works to minimize the appearance of camera shake for sharper handheld shooting with any mounted lens. This is ideal for working in low-light conditions or with longer lenses and, since the image stabilization is located within the body, both past, legacy lenses as well as current Pentax lenses receive the benefits of SR.

SAFOX X Autofocus System
The SAFOX X autofocus system employs 11 distinct phase-detection points, including 9 cross-type sensors in the center, to quickly and accurately acquire focus on subjects in a variety of lighting conditions down to -3 EV. Also benefitting autofocus performance, the 77-segment exposure metering sensor, light source sensor, and AF assist light help to further refine the focusing accuracy despite working in challenging situations.

Sensor

Effective megapixels
24.2
Megapixels
24 megapixels
Sensor size
Crop frame
Sensor type
CMOS
Sensor size
23.5 × 15.6 mm
APS-C
Full frame
No
Crop factor
1.5×
Aspect ratio
3 : 2
Largest image size
6000 × 4000
Smallest image size
1920 × 1280
Imaging processor
PRIME M II (PENTAX Real iMage Engine)
ISO
1/3, 1/2 or 1 EV increments
100 – 204 800
Filters
Primary color filter
Selectable Anti-Aliasing filter
Dust removal
Yes
Colour space
Adobe RGB
sRGB
A/D converter
12 bit

Bayonet

Camera body mount
Pentax KAF
Compatible lenses
Pentax KAF3
Pentax KAF2 (power zoom not compatible)
Pentax KAF
Pentax K-mount (with restrictions)
Compatible with Pentax S-mount
Pentax 67 (with 37954 adapter)
Pentax 645 (with 38455 adapter)
M-42 (with 30120 adapter)

Image stabiliser

Image stabiliser
Yes
Image stabilizer design
Sensor Shift Shake Reduction (SR)
Stabilization axis
3-axis

Focusing

Focusing sensor
SAFOX X sensor
TTL phase detection
Contrast detect autofocus in Live View mode
Autofocus points
11
9 cross-type points
AF sensor working range
-3 – 18 EV
Autofocus modes
Single
Continuous
Auto
Manual
Focus lock
Yes
Can be locked by pressing shutter-release button halfway
Focus point selection
Auto (11 or 5 points)
Wide
Center spot
Spot
Autofocus micro adjustment
No
AF assist light
Yes

Exposure metering

Metering
TTL metering
77 segment metering
Metering range
0 – 22 EV
Modes
Multi-segment (evaluative)
Center weighted average
Spot
AE lock
Yes
With AE-L/AF-L button
Exposure compensation
±5 EV
1/3 EV increments
Exposure bracketing
Yes

Shutter

Shutter
Electronically-controlled
Vertical-travel focal-plane shutter
Shutter speed
1/6000 – 30 sec
Bulb

Shooting

Exposure modes
Auto
Scene
Program
Aperture priority
Shutter priority
Sensitivity priority
Shutter and aperture priority
Manual (metered)
Bulb
User (2)
Scene modes
19
Drive modes
Single
Continuous (High)
Continuous (Low)
Self-timer 2 sec
Self-timer 10 sec
Remote control (No delay)
Remote (3 sec)
Exposure bracketing
HDR capture
Interval timer
Digital filters
Yes
Still image continuous shooting
6 fps
JPEG: up to 40 frames
RAW up to 10 frames)
JPEG+RAW
Yes

White balance

White balance metering
System combining CMOS image and light source detection sensors
White balance modes
Auto
Daylight
Cloudy
Shade
Tungsten
Fluorescent (4)
Flash
Manual
CTE
Color temperature configuration (Adjustable ±7 steps on A-B or G-M axis)
Copying the white balance from image
WB Bracketing
No

Movie recording

Video recording
Full HD 1920 × 1080
Video resolution
[FullHD] 1920 × 1080 60i/50i
Other formats
[FullHD] 1920 × 1080 30p/25p
[FullHD] 1920 × 1080 24p
[HD] 1280 × 720 60p/50p
[HD] 1280 × 720 30p/25p
[HD] 1280 × 720 24p
Duration
25 minutes (max)
Automatically stops recording if the internal temperature of the camera becomes high
Microphone
Integrated stereo microphone

File types

JPEG
EXIF 2.3
DCF
RAW
PEF
DNG
12 bit lossless compression
Movie format
MOV (Video: H.264/MPEG-4 AVC; Audio: Linear PCM stereo)

Viewfinder

Viewfinder
Optical
Viewfinder type
Eye-level pentaprism
Coverage
100%
Magnification
0.95×
Dioptre correction
-2.5 – +1.5
Focusing screen
Natural Bright Matte III
Mirror
Quick-return half mirror
Transmission: reflection ratio of 40:60
Depth of field preview
Yes

LCD monitor

Display type
TFT LCD
Air-gapless glass
Display size (inches)
3.0
Screen dots
921 000
Articulation
Fully articulated
Touch screen
No
Coverage
100%
Adjustments
Brightness
Saturation
Live View
Yes

Storage

Memory card slots
1
Memory card type
SD
SDHC
SDXC (UHS-I)
Other
Eye-Fi compatible
FLU card compatible

Flash

Flash type
Built-in TTL flash
Guide number
12 (m, ISO 100)
Coverage
28mm (in 35mm format)
Flash modes
Auto
Flash on
Flash off
First curtain sync
Rear curtain sync
High speed sync
Manual
Wireless
Flash exposure compensation
-2 – +1 EV
External flash
External flashguns with P-TTL support
Flashguns with standard hot shoe in manual mode
Hot shoe
Yes
ISO 518 standard hot shoe
X-Sync
1/180 sec

Interface

USB
1 × microUSB 2.0
Video
microHDMI (Type D)
Remote control
Pentax cable switch CS-310
Pentax remote control O-RC1
Via connected smartphone
Wireless
WiFi IEEE 802.11 b/g/n
Bluetooth
No
Connectivity
WiFi

Features

GPS
With O-GPS1 module
Electronic level
Yes (dual axis, can be displayed on screen or viewfinder)
Panorama
Yes
HDR
Yes
Time lapse
Yes

Power source

Battery
D-LI109 lithium battery
Battery life
410 shots (CIPA)
External power source
K-AC168 AC adapter

Body

Weather sealing
Dustproof and weatherproof
100 different seals
Color
Black
Height (mm)
93
Width (mm)
125.5
Depth (mm)
74
Weight (body only)
628 g
Weight (with battery and memory card)
688 g
Kit
Body with two lenses
Supplied lens
HD Pentax DA 18-50mm f/4.0-5.6 DC WR RE
Supplied lens (2)
smc Pentax DA 50-200mm f/4-5.6 AL WR
Package contents
Lithium battery D-LI109
Battery charger D-BC109
Hotshoe cover FK
Eyecup FR
Hot shoe cover
Body mount cover
Hot shoe cover

Product codes

EAN
0027075299436
027075299436
Manufacturer code
16295

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal 

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD parcel locker

Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.

See DPD parcel locker locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

The product is out of stock. For additional availability and preorder information please contact us here.

Product comparison

Close