UPS RACK 19" ARMAC ON-LINE 3000VA LCD 6X IEC C13 OUTLETS METAL CASE

Main info

Armac Rack On-line series UPS - R/3000I/ONL was designed for demanding users who want to safely maintain the work of electronic equipment within 19” Rack cabinet (and not only) that consumes vast amounts of energy in the event of a power outage. Pa

Product has been archived

Armac Rack On-line series UPS - R/3000I/ONL was designed for demanding users who want to safely maintain the work of electronic equipment within 19” Rack cabinet (and not only) that consumes vast amounts of energy in the event of a power outage.

Paused operation, failure of electronic devices can cause not only severe financial losses but also the loss of essential data. That is why it is worth investing in the UPS model R/3000I/ONL, which will prevent many unpleasant effects of potential overvoltage.

DEDICATED FOR 19" RACK SERVER CABINETS

The purpose of uninterruptible power supplies from the Rack On-line series is to ensure security of equipment in server, IT rooms, etc. Dedicated to 19" Rack server cabinets, the R/3000I/ONL model provides comprehensive protection against overvoltages, while regulating the voltage of the powered device and maintaining its operation in the event of a power outage.

IMMEDIATE RESPONSE TO AN INTERRUPTION IN THE POWER SUPPLY

R/3000I/ONL is a high-quality uninterruptible power supply with On-line topology. The device operates in continuous mode, which means that in the event of a power failure it does not have to switch to battery operation; The UPS immediately starts running on battery, without any delay, significantly reducing the risk of damage to the connected device.

POSSIBILITY OF EXTENDING THE BACKUP TIME

There are situations in which much more time is needed to ensure the safety of electronic devices during a power failure. Therefore, to extend its battery backup time, the R/3000I/ONL uninterruptible power supply is equipped with a socket for connecting additional, dedicated Battery Pack B/0609/R modules. However, it is worth remembering that when connecting BP, make sure that the combined voltage of the UPS battery and the BP module is the same.

EFFICIENT, FUNCTIONAL SOLUTION

Uninterruptible power supply model R/3000I/ONL was created for the most demanding tasks within 19” Rack cabinets, such as supporting the work of workstations, servers or high energy consumption network/surveillance systems. The UPS can perform such hard work due to the use of more efficient 9Ah batteries, with a Power Factor of 0.8. What is more, this model has 6 IEC 320 C13 output sockets, with which it can protect several devices at once.

Due to the nature of its operation (Pure sine wave during battery operation), the UPS can be used with devices with an electric motor or heater, e.g., laser printers, scanners, garage and entry gates, electric roller blinds, central heating furnaces.

CONVENIENT OPERATION MONITORING SYSTEM

The Armac uninterruptible power supply communicates via both the USB and the RS-232 port.
Both of these methods allow you to connect the UPS to the PC and issue commands or monitor the operation of the device using PowerManager II software. It is a convenient and straightforward way to ensure proper protection for valuable equipment.

The RS-232 port gives users more room for maneuver in the field of UPS management.

VARIOUS INSTALLATION POSSIBILITIES AND HELPFUL ASSEMBLY ACCESSORIES INCLUDED

The device can be mounted inside a 19" rack cabinet in two ways: using just the mounting ears (included with the product) or with the help of additional Armac' mounting rail set - R/0019, recommended installation option due to the better stability and security of Battery Pack.

Also included with the UPS are unique stands, allowing the device to be installed vertically, outside the Rack cabinet.

In the box, apart from mounting ears for 19" Rack cabinets, you can also find a supply of M6 screws and cage nuts. Both products are made of a metal alloy that guarantees their reliability. There is no question of bent accessories that instead of helping, e.g., hinder the installation within the server cabinet.

ARMAC UPS SAFETY - OVERLOAD PROTECTION

Uninterruptible power supply R/3000I/ONL also copes well with challenging tasks in the office, server room or IT workshop, such as protection of workstations, servers, or network or monitoring systems with high energy consumption. The UPS has 6 IEC 320 C13 output sockets, allowing many devices to be connected to it.

Importantly, each Armac emergency power supply system is equipped with an overload protection module. When the UPS is overloaded during its regular operation, the device will automatically safely shut down the power supply to the equipment connected to it. This solution strengthens the safety and comfort of using Armac uninterruptible power supplies.

MICROPROCESSOR CONTROL – EFFECTIVE SURVEILLANCE OF SENSITIVE DEVICES

The proper work of the emergency power supply is supervised by a specially built-in processor that controls the parameters of the device itself, its correct operation and the power supply of connected devices. The technology used in the UPS also ensures automatic battery charging in Stand-By mode, as well as automatic start-up feature after the power supply returns.

AUTOMATIC VOLTAGE STABILIZER – AVR

With the implemented of AVR feature in R/3000I/ONL, standard solutions commonly found in
Line-interactive UPS are improved. That is due to the use of the network autotransformer, which regulates the voltage transmitted to devices connected to the UPS on an ongoing basis. AVR, therefore, provides comfort and high performance.

AUTOMATIC VOLTAGE STABILIZER – AVR

• If the voltage is about 255V or higher, then UPS will transmit the AC power to the autotransformer (AVR) and the output voltage will be within the allowable range from 195 to 255V.

• If the voltage is approximately 195 V or less, then UPS will transmit the AC power to the autotransformer (AVR) and the output voltage will be within the allowable range from 195V to 255V.

Product codes

EAN
5901969421446
Manufacturer code
R/3000I/ONL

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal 

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD parcel locker

Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.

See DPD parcel locker locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

The product is out of stock. For additional availability and preorder information please contact us here.

Product comparison

Close