Home page » Photo»Tripods & accessories»Stabilizer systems»DJI Ronin-M + 2 batteries

DJI Ronin-M + 2 batteries

Main info

  • Support cameras up to 3.6 kg
  • Precision of control: ±0.02°
  • Tool-less balance adjustment system
  • Battery life up to 6 hours
  • Two batteries included

Product has been archived

Incredibly compact, unbelievably light
Weighing just 2.3 kilograms, about half the weight of the original Ronin, the slimmed down Ronin-M is small enough to fit into your backpack and take anywhere, yet strong enough to support camera setups weighing up to 3.6 kilos.

Fast setup, precise balancing
Save time and start shooting professionally stabilized video in under 5 minutes. Mount your camera to the Ronin-M, quickly balance it, and then tap a button. The upgraded ATS (Auto Tune Stability) technology is more precise than before and completes the tuning and balancing processes with no tools necessary. Easy and efficient.

Simple disassembly for unmatched flexibility
Capture tight shots, even when you have almost no space to work, and easily transport your Ronin-M. The top handle bars quickly and easily twist off, allowing you to minimize its size, achieve different shooting configurations, and pack or unpack it in seconds.

New magnesium frame
Your Ronin-M stands up to rugged use in any filming environment. Featuring a superbly strong and rigid magnesium frame, the Ronin-M brings increased stiffness and reduced weight. Notoriously difficult to manufacture and mold, magnesium brings you a new, more exact shooting experience while maintaining easy maneuverability and increasing options on set.

Solid support arm
Increased rigidity is provided by a single, complete piece of fine-tooled magnesium that forms the U-shaped arm holding the camera plate. Only made possible by DJI’s large manufacturing reach and expertise, this unified design eliminates imperfections that are common in systems made of multiple pieces assembled together. This arm gives you not only greater stability but also reliability, as there is no potential for separate pieces to come loose or move apart.

Smoothtrack control
Even with only one operator, SmoothTrack technology ensures the Ronin-M translates your movements into smooth camera angle changes. Your camera intuitively faces the direction you want, all while completely stabilized, no matter how you move. SmoothTrack settings from speed to deadband to acceleration are fully customizable, and ‘Single Axis Follow Mode’ enables you to lock two axes while SmoothTrack guides your camera along only one axis of motion.

Endless shooting scenarios, one flexible solution
Capture shots that are impossible with any other setup. Switch effortlessly between the 3 modes of operation, without adjusting any settings or needing a 2nd operator remote.
  • Underslung mode: Film effortlessly and comfortably in the most common shooting mode, holding the Ronin-M directly in front of you at chest level.
  • Upright mode: Shoot at or above eye-level by flipping and lifting the lightweight Ronin-M above your head. This mode is perfect for shooting out of a car’s sunroof or above a crowd of people.
  • Briefcase mode: Filming in narrow spaces or moving through a doorway is effortless with Briefcase mode. Turn the gimbal vertically and hold it by your side close to your legs, just like a briefcase.

Long battery life
Film all day, until you get every shot, with the Ronin-M’s smart battery and a runtime of over 6 hours. Overcharge and over depletion protection is built in, as is individual cell charge balancing. Remaining power is shown by clear LEDs and in the Assistant mobile app.

Powerful motors, precision control
Designed with high performance in mind, the Ronin-M’s brushless motors are incredibly precise and powerful while maintaining low vibration and increasing torque. Industry-leading accuracy is increased even further with Digital Absolute Positioning Encoders in each axis, and a much larger range of controllable motion on both the tilt (105° Up, 165° Down) and roll (± 110°) axes.

Silent mode
When shooting indoors or in tight spaces, a new Silent Mode reduces the sound of each motor to almost inaudible levels. The Ronin-M’s stabilization algorithms are instantly changed to focus on strength for minute changes and stabilization, ensuring the sound of the motors is not recorded by sensitive microphones or other recording equipment.

Second operator for impossible shots
Capture anything you can imagine with a second operator controlling the camera’s movements as the first operator moves around set. Achieve perfect framing and complete more complex camera movements by working together and making your camera’s motions completely independent of the person holding it.

Mounts to anything
Easily mount your Ronin-M with a quick-release system that is compatible with a wide range of universal connections. Remove the top bar assembly in seconds and put your Ronin-M on a jib, crane, tripod, or anything else.

Power your tools
A dedicated power distribution box keeps wiring to a minimum while providing power to your key accessories. Two regulated 12V P-taps, one 500mAH full-size USB connector, and a DJI Lightbridge connector enable you to connect and provide power to everything you need.


One Bluetooth App, a World Of Options
Change settings on the go with the simple DJI Assistant app that links to your Ronin-M over Bluetooth. Auto Tune, adjust your favorite settings, monitor the status of your Ronin-M, and customize SmoothTrack in seconds.

Future-proofing with upgradable firmware
Take advantage of new features and updates by downloading the latest firmware online and updating your Ronin-M instantly.

Compatible Thumb controller
Gain more control over your camera’s motions with a built-in receiver that is fully compatible with the optional DJI Ronin Thumb Controller. Point the camera in any direction and save preset settings for fast, easy operation.


Built-In Functions
  • Three Operation Modes
    Underslung Mode
    Upright Mode
    Briefcase Mode
  • Built-in, independent IMU module
  • DJI Specialized Gimbal Drive Motors with Encoders
  • Bluetooth Module
  • USB Connection
  • 2.4GHz Receiver
  • Temperature Sensor
  • DJI Advanced 32-Bit DSP Processor
  • D-Bus Receiver Supported

Peripheral

  • Camera Tray Dimensions:
    Maximum depth at center of mass on camera base plate: 120mm
    Maximum height measured from top of camera base plate: 195mm
    Maximum width: 160mm
  • Accessory Power Connections: 12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
  • GCU Input Power: 4S Ronin-M Battery
  • Connections: 2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0
  • PC Assistant Software Requirements: Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)；Mac OS X 10.9 or above
  • Mobile Assistant Software Requirements: Mobile Device: iOS 6.1 or above, Android 4.3 or above

Mechanical & Electrical Characteristics

  • Working Current:
    Static current: 300mA (@16V)
    Dynamic current: 600mA (@16V)
    Locked motor current: Max 10A (@16V)
  • Operating Temperature: -15°C - 50°C
  • Weight: 2.3 kg fully loaded with handlebar
  • Gimbal dimensions: 500 × 210 × 420 mm

Working Performance

  • Load Weight (Reference Value): 3.6 kg
  • Angular Vibration Range: ± 0.02°
  • Maximum controlled rotation speed:
    Pan axis: 90°/s
    Tilt axis: 100°/s
    Roll axis: 30°/s
  • Mechanical endpoint range:
    Pan axis: 360°
    Tilt axis: +105° /-190°
    Roll axis: ± 110°
  • Controlled rotation range:
    Pan axis control: 360°
    Tilt axis control: +105° /-190°
    Roll axis control: ± 25°

Blog posts mentioning this product:

Product codes

EAN
6958265121173
0190021004139
Manufacturer code
CP.ZM.000173.03

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal 

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD parcel locker

Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.

See DPD parcel locker locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

The product is out of stock. For additional availability and preorder information please contact us here.

Product comparison

Close