Sākumlapa » Foto»Binokļi»Piederumi šauteņu tēmekļiem»Guide Clip-On Adapter Ring B for Riflescopes 48-54mm

Guide Clip-On Adapter Ring B for Riflescopes 48-54mm

Pamatinformācija

The Clip-On Adapter Ring B for Riflescopes 48-54mm is the adapter you need to attach the Guide TA435 and TA450 to your riflescope. This adapter ring can be used with optical rifle scopes with an outer diameter of 48 to 54mm. This adapter is the neces

Prece ir arhivēta

The Clip-On Adapter Ring B for Riflescopes 48-54mm is the adapter you need to attach the Guide TA435 and TA450 to your riflescope. This adapter ring can be used with optical rifle scopes with an outer diameter of 48 to 54mm. This adapter is the necessary connection to turn your optical rifle scope into a thermal imaging rifle scope.

This article includes two sets of strips. One set consists of serrated strips with an adhesive edge. This is to protect your rifle scope extra well when you attach the adapter to your rifle scope. The serrated edge ensures a good grip. You will also receive a number of black 'smooth' strips. These are used to adjust the adapter ring exactly to the outer diameter of your rifle scope. Finally, a screw mount is also included to secure the adapter ring securely.

Application Guide Adapter Ring B (48-54mm)

You can use this adapter ring to turn your optical rifle scope into a thermal rifle scope. For this you need the thermal rifle scopes from Guide: model TA435 or TA450 (see optional accessories). This adapter is the connection you need to attach these thermal imaging clip-ons to your rifle scope. The Guide Adapter Ring 'B' is the right adapter if your rifle scope has an outside diameter between 48 and 54mm.

Note that the outer diameter includes the housing that surrounds the lens of your rifle scope, not the diameter of the lens itself. So first measure the outside diameter of your own rifle scope to decide if this adapter ring is the right one. Adapter rings for other diameters can be found with the optional accessories.

Step-by-step

• Screw the Guide TA435 or TA450 thermal imaging camera into the thread of the adapter ring
• Remove the white sticker from the gray, jagged strip
• Stick the protective strip with the adhesive edge around the casing of your rifle scope
• Place the correct diameter adapter strip on the inside of the ring (diameter is mentioned on that black strip)
• Pull the adapter ring slightly apart and attach it securely around your rifle scope to the protective strip
• Use the screw to tighten the washer so that the whole unit remains securely in place


1x Adapter ring A for rifle scopes 48-54mm;1x Set with protective strips for your rifle scope;1x Set with diameter adapters;1x Screw mount

Produktu kodi

EAN
8718127026248
Ražotāja kods
503146

Pasūtījumiem virs 99 € Photopoint piedāvā bezmaksas piegādi Igaunijas teritorijā. Ieskatieties cilnē „Piegāde”, lai iegūtu precīzāku piegādes cenu aprēķinu.

Jūs varat izvēlēties vēlamo piegādes veidu iepirkumu grozā:
Omniva paku termināls

Jūs varat pasūtīt preces uz jebkuru no Omniva paku termināļiem. Izvēlieties vēlamo termināli iepirkumu grozā. Līdzko sūtījums ieradīsies, Jums tiks nosūtīts SMS ziņojums ar unikālu kodu. Dodieties uz termināli nedēļas laikā, ievadiet kodu un paņemiet savu sūtījumu. Tas ir tieši tik vienkārši!
Omniva paku termināļu adreses skatīt šeit. Omniva kurjera piegāde

Kurjers nogādās Jūsu preces no Photopoint tieši uz Jūsu norādīto adresi. Piegāde tiek veikta darba dienās no 08:00 līdz 17:00. Kurjers Jums piezvanīs pirms ierašanās, tāpēc turiet savu telefonu tuvumā. Lūdzu, pārliecinieties, ka piegādes galamērķī atrodas persona, kas būs ir tiesīga saņemt sūtījumu.
Prece nav pieejama. Papildus informācijai par pieejamību un iepriekšēju pasūtīšanu, lūdzu, sazinieties ar mums šeit.

Preču salīdzinājums

Aizvērt