Home page » Electronics»Audio»Accessories for microphones»Sensor with solar panel for Redleaf RD200 system

Sensor with solar panel for Redleaf RD200 system

Addional discount of 10%
will be applied in shopping cart
(min. 10€ purchase)
33,99 €

Main info

Add to cart

Delivery in 7-10 working days

Delivery starting at 0 €

14 14 days return policy when purchasing online

Solar panel sensor for Redleaf RD200 system The solar panel sensor allows you to extend the capabilities of the Redleaf RD200 alarm system, providing control in more rooms or within different points on the property. Such a solution will help to increase the level of security and facilitate daily operations in offices, shops or warehouses. The wireless communication of the solar-powered motion detector and receiver, which can be up to 800 metres apart, will avoid the use of cables, providing versatility of use. You can also power the devices from the micro USB port if required. The motion sensor is IP66 compliant, so it is unafraid of rain and dust. The basic version of the Redleaf RD200 system is expandable with 3 additional sensors. Main product features sensor with solar panel designed to work as part of the Redleaf RD200 alarm system up to 800 metres communication range between sensor and receiver with alarm module 2-stage sensor sensitivity adjustment (motion detection from up to 6m or 9.1m distance) possibility of linking 4 sensors within a single alarm system motion detection operating at 60º horizontally and 40º vertically solar panel powering the motion detector with a maximum power of 0.35 W additional option to charge the motion sensor via a micro USB port resistant to dust and rain (IP66 standard) SUN PANEL SENSORS ARE EXTENSIVE TO THE REDLEAF RD200 SYSTEM, which must be purchased separately. Solar powered A solar panel built into the motion sensor housing powers the 1,500 mAh battery, so you don't have to worry about replacing batteries regularly. All you need to do is install the device in a location that allows it to self-charge with renewable energy that you don't have to pay for. Want to install sensors in rooms where the sun doesn't reach? No problem! The Micro USB port will allow you to regularly recharge the built-in battery. The manufacturer has also taken care of a special LED that will inform you of the loss of power in the motion detector. New level of security With the solar panel sensors for the Redleaf RD200 system, you can take real action whenever the devices identify movement in the monitored area. You can enlist the help of up to four discreet 'watchdogs'. The detectors will react to movement in real time and send information to the receiver via radio within a second. A short, pleasant melody (the volume of which can be adjusted) will inform you of the presence of visitors or intruders. An LED on the receiver will also illuminate, making it easier to identify which sensor has tripped. Water and dust resistance The Redleaf RD200 motion sensors meet the IP66 waterproof standard, so you can install them anywhere they may be exposed to harsh weather without worry. Whatever the weather, the devices are always ready for action. They are designed to be unaffected by rain, snow and dust! Fast setup process With the Redleaf RD200 alarm system, you don't have to waste time with time-consuming set-up, even when you want to use four independent sensors. Simply switch on all devices, set the switches that define each channel and.... done. The receiver will identify the sensors itself, which can be up to 800 metres away from it. No cables, no complicated configuration operations! Simply take the individual system components out of the box, choose the power supply method and enjoy a higher level of security on your property! Specification model: sensor with solar panel for Redleaf RD200 system compatibility: Redleaf RD200 alarm system radio communication: 433 MHz transmission range: up to 800 m number of selectable channels: 4 Sensor sensitivity: large: 9.1 m (high sensitivity) small: 6 m (low sensitivity) solar panel power: max. 0.35 W tightness standard: IP66 battery in sensor: built-in (1500 mAh) Charging of sensor: solar energy micro USB port (5V / 1A) dimensions: 89 x 89 x 85 mm weight: 188 g Kit contents Sensor with solar panel for Redleaf RD200 system

Product codes

EAN
5907489646413

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal 

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD parcel locker

Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.

See DPD parcel locker locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

The product can only be ordered from our online store and it takes from 7-10 working days for delivery within Estonia.

Product comparison

Close