Pentax K-3 II body
43708
Main info
- 24.3 megapixel APS-C CMOS sensor
- In-body 4.5-stop image stabilization
- Selectable anti-aliasing filter
- Durable weather sealed body
- Integrated GPS & Astrotracer
Product has been archived
24.35 MP APS-C CMOS Sensor and PRIME III Processor
A large 24.35 MP APS-C CMOS sensor and PRIME III image processing engine work together to enable high-resolution imaging and full HD video recording with notable low-light sensitivity from ISO 100-51200. The image processor also contributes to a wealth of shooting speed for the camera, including a top full-resolution continuous shooting rate of 8.3 fps for up to 23 consecutive RAW images or 60 JPEGs and a maximum shutter speed of 1/8000 sec. This highly durable, advanced shutter mechanism employs a three-motor system that independently regulates the shutter, mirror, and diaphragm to minimize mirror shock for accurately-rendered images when shooting at higher frame rates.
Selectable Anti-Aliasing Filter
A unique and innovative mechanism allows you to toggle an anti-aliasing filter effect either on or off, providing support for both the high-resolution abilities of a filter-less design as well as advanced moiré protection. With the filter in the Off position, the camera is more prone to acquiring maximum sharpness, resolution, and detail from an image for the highest attainable image quality. When the filter position is set to either Type1 or Type2, an anti-aliasing simulator applies microscopic vibrations to the image sensor unit during exposure; working to create the same effect as an optical anti-aliasing filter. Having both options available extends the camera's versatility and allows personalized selection of the benefits best-suited to individual applications. Additionally, AA filter simulation settings can also be bracketed for times when the likelihood of moiré is unknown.
Pixel Shift Resolution and Diffraction Correction
For increasing the effective resolving power, reducing noise, and achieving a more refined color palette, Pixel Shift Resolution technology composited four sequentially recorded stills while shifting the image sensor in one pixel increments in each direction after each exposure. This allows each pixel to record its own unique set of RGB data, rather than having each pixel record only red, green, or blue values per exposure and de-mosaicing or interpolating this information to form a final image. Since no interpolation is used, truer colors and reduced noise is possible, as well as increased edge sharpness and apparent clarity. This mode is most effective when photographing stationary objects from a tripod due to the extended duration and precision required during the process.
Also helping to increase sharpness, a Diffraction Correction function offers an effective two stop improvement in regard to the effects of diffraction and other aberrations common to working with smaller aperture sizes. This technology is possible due to the heightened processing capabilities of the PRIME III engine, and can also be applied to imagery during in-camera raw file development.
SAFOX11 Autofocus System
The SAFOX11 autofocus system employs 27 distinct phase-detection points, including 25 cross-type sensors, to quickly and accurately acquire focus on subjects in a variety of lighting conditions. Three central points also cover an f/2.8 luminance flux to extended sensitivity when working in lighting conditions as low as -3 EV. Also benefitting autofocus performance, the 86k-pixel RGB exposure metering sensor, light source sensor, and AF assist light help to further refine the focusing accuracy despite working in challenging situations.
The AF-C (continuous AF) algorithm also benefits from the use of the exposure metering sensor, which aids in maintaining responsive and accurate tracking performance on moving subjects, especially when moving perpendicular to the camera. AF-S (single-shot AF) performance has also been increased and requires less redundant movement, or fine-adjustment hunting, prior to acquiring focus.
86k-Pixel RGB Sensor Exposure Metering
In addition to benefitting the AF performance of the K-3 II, the 86k-pixel RGB sensor also helps to ensure accurate and consistent exposure metering with a range of -3 to +20 EV. A Real-Time Scene Analysis System analyzes the scene and subject at hand, and employs exposure meter readings and both color distribution and color movement detection to produce an exposure capable of best-rendering subjects.
Sensor-Shift Type Shake Reduction
With the inclusion of a high sensitivity gyro sensor, in-camera sensor-shift type Shake Reduction (SR) works to minimize the appearance of camera shake by 4.5 EV steps when using any mounted lens. Ideal for working in low-light conditions or with longer lenses, since the image stabilization is located within the body, both past, legacy lenses as well as current Pentax lenses all receive the benefits of SR. This image stabilization system can also detect horizontal panning motion and compensate for the lateral movement during shooting.
GPS, Electronic Compass, and AstroTracer
A built-in GPS module and electronic compass allow you to geotag your imagery during shooting for plotting to interactive maps to track where and when your shots were made on Google Earth.
Also benefitting from the GPS module, as well as the Shake Reduction sensor-shift mechanism, the K-3 II features a unique AstroTracer function to better enable making long exposures of the nighttime sky. Using the GPS coordinates and orientation of the camera, the image sensor will shift during the course of an exposure in order to compensate for the Earth's rotation and prevent star trails from occurring; resulting in sharper, clearer imagery and alleviating the need for an optional equatorial mount.
Full HD 1080p Video Recording and Time Lapse Movies
Full HD 1920 x 1080 video recording is supported in multiple frame rates, including 60i, 50i, 30p, 25p, and 24p, in the high-quality H.264 format. HD 1280 x 720 video is also supported in 60p, 50p, 30p, 25p, and 24p frame rates. Audio can be recorded along with video using the built-in microphone or, additionally, a 3.5mm microphone terminal is available for use of an external mic.
Beyond standard movie recording, an interval timer can also be used for making time-lapse sequences, which can be saved at 4K resolution (3840 x 2160) and compiled into a Motion JPEG file for seamless playback. The interval timer allows you to record up to 2,000 consecutive frames with an interval of 2 seconds to 24 hours between each frame, and a 2 second to 24 hour time delay available. When compositing frames, you can use Additive, Average, or Bright settings to smooth the transitions between frames.
A large 24.35 MP APS-C CMOS sensor and PRIME III image processing engine work together to enable high-resolution imaging and full HD video recording with notable low-light sensitivity from ISO 100-51200. The image processor also contributes to a wealth of shooting speed for the camera, including a top full-resolution continuous shooting rate of 8.3 fps for up to 23 consecutive RAW images or 60 JPEGs and a maximum shutter speed of 1/8000 sec. This highly durable, advanced shutter mechanism employs a three-motor system that independently regulates the shutter, mirror, and diaphragm to minimize mirror shock for accurately-rendered images when shooting at higher frame rates.
Selectable Anti-Aliasing Filter
A unique and innovative mechanism allows you to toggle an anti-aliasing filter effect either on or off, providing support for both the high-resolution abilities of a filter-less design as well as advanced moiré protection. With the filter in the Off position, the camera is more prone to acquiring maximum sharpness, resolution, and detail from an image for the highest attainable image quality. When the filter position is set to either Type1 or Type2, an anti-aliasing simulator applies microscopic vibrations to the image sensor unit during exposure; working to create the same effect as an optical anti-aliasing filter. Having both options available extends the camera's versatility and allows personalized selection of the benefits best-suited to individual applications. Additionally, AA filter simulation settings can also be bracketed for times when the likelihood of moiré is unknown.
Pixel Shift Resolution and Diffraction Correction
For increasing the effective resolving power, reducing noise, and achieving a more refined color palette, Pixel Shift Resolution technology composited four sequentially recorded stills while shifting the image sensor in one pixel increments in each direction after each exposure. This allows each pixel to record its own unique set of RGB data, rather than having each pixel record only red, green, or blue values per exposure and de-mosaicing or interpolating this information to form a final image. Since no interpolation is used, truer colors and reduced noise is possible, as well as increased edge sharpness and apparent clarity. This mode is most effective when photographing stationary objects from a tripod due to the extended duration and precision required during the process.
Also helping to increase sharpness, a Diffraction Correction function offers an effective two stop improvement in regard to the effects of diffraction and other aberrations common to working with smaller aperture sizes. This technology is possible due to the heightened processing capabilities of the PRIME III engine, and can also be applied to imagery during in-camera raw file development.
SAFOX11 Autofocus System
The SAFOX11 autofocus system employs 27 distinct phase-detection points, including 25 cross-type sensors, to quickly and accurately acquire focus on subjects in a variety of lighting conditions. Three central points also cover an f/2.8 luminance flux to extended sensitivity when working in lighting conditions as low as -3 EV. Also benefitting autofocus performance, the 86k-pixel RGB exposure metering sensor, light source sensor, and AF assist light help to further refine the focusing accuracy despite working in challenging situations.
The AF-C (continuous AF) algorithm also benefits from the use of the exposure metering sensor, which aids in maintaining responsive and accurate tracking performance on moving subjects, especially when moving perpendicular to the camera. AF-S (single-shot AF) performance has also been increased and requires less redundant movement, or fine-adjustment hunting, prior to acquiring focus.
86k-Pixel RGB Sensor Exposure Metering
In addition to benefitting the AF performance of the K-3 II, the 86k-pixel RGB sensor also helps to ensure accurate and consistent exposure metering with a range of -3 to +20 EV. A Real-Time Scene Analysis System analyzes the scene and subject at hand, and employs exposure meter readings and both color distribution and color movement detection to produce an exposure capable of best-rendering subjects.
Sensor-Shift Type Shake Reduction
With the inclusion of a high sensitivity gyro sensor, in-camera sensor-shift type Shake Reduction (SR) works to minimize the appearance of camera shake by 4.5 EV steps when using any mounted lens. Ideal for working in low-light conditions or with longer lenses, since the image stabilization is located within the body, both past, legacy lenses as well as current Pentax lenses all receive the benefits of SR. This image stabilization system can also detect horizontal panning motion and compensate for the lateral movement during shooting.
GPS, Electronic Compass, and AstroTracer
A built-in GPS module and electronic compass allow you to geotag your imagery during shooting for plotting to interactive maps to track where and when your shots were made on Google Earth.
Also benefitting from the GPS module, as well as the Shake Reduction sensor-shift mechanism, the K-3 II features a unique AstroTracer function to better enable making long exposures of the nighttime sky. Using the GPS coordinates and orientation of the camera, the image sensor will shift during the course of an exposure in order to compensate for the Earth's rotation and prevent star trails from occurring; resulting in sharper, clearer imagery and alleviating the need for an optional equatorial mount.
Full HD 1080p Video Recording and Time Lapse Movies
Full HD 1920 x 1080 video recording is supported in multiple frame rates, including 60i, 50i, 30p, 25p, and 24p, in the high-quality H.264 format. HD 1280 x 720 video is also supported in 60p, 50p, 30p, 25p, and 24p frame rates. Audio can be recorded along with video using the built-in microphone or, additionally, a 3.5mm microphone terminal is available for use of an external mic.
Beyond standard movie recording, an interval timer can also be used for making time-lapse sequences, which can be saved at 4K resolution (3840 x 2160) and compiled into a Motion JPEG file for seamless playback. The interval timer allows you to record up to 2,000 consecutive frames with an interval of 2 seconds to 24 hours between each frame, and a 2 second to 24 hour time delay available. When compositing frames, you can use Additive, Average, or Bright settings to smooth the transitions between frames.
Sensor
Effective megapixels
24.35
Megapixels
24 megapixels
Sensor size
Crop frame
Sensor type
CMOS
Sensor size
23.5 × 15.6 mm
APS-C
APS-C
Full frame
No
Crop factor
1.5×
Aspect ratio
3 : 2
Largest image size
6016 × 4000
Smallest image size
1920 × 1280
Imaging processor
PRIME III (PENTAX Real iMage Engine)
ISO
100 – 51 200
1/3, 1/2 or 1 EV increments
1/3, 1/2 or 1 EV increments
Filters
Primary color filter
Selectable Anti-Aliasing filter
Selectable Anti-Aliasing filter
Dust removal
DRII (Dust Removal II)
Dust Alert function
Dust Alert function
Colour space
sRGB
Adobe RGB
Adobe RGB
Bayonet
Camera body mount
Pentax KAF
Compatible lenses
Pentax KAF3
Pentax KAF2 (power zoom not compatible)
Pentax KAF
Pentax K-mount (with restrictions)
Compatible with Pentax S-mount
Pentax 67 (with 37954 adapter)
Pentax 645 (with 38455 adapter)
M-42 (with 30120 adapter)
Pentax KAF2 (power zoom not compatible)
Pentax KAF
Pentax K-mount (with restrictions)
Compatible with Pentax S-mount
Pentax 67 (with 37954 adapter)
Pentax 645 (with 38455 adapter)
M-42 (with 30120 adapter)
Image stabiliser
Image stabiliser
Yes
Image stabilizer design
Sensor Shift Shake Reduction (SR)
Stabilization axis
3-axis
Stabilizer performance
4.5 stops
Focusing
Focusing sensor
SAFOX 11 sensor
TTL phase detection
Contrast detect autofocus in Live View mode
TTL phase detection
Contrast detect autofocus in Live View mode
Autofocus points
27
25 cross-type points
25 cross-type points
AF sensor working range
-3 – 20 EV
Autofocus modes
Single
Continuous
Auto
Manual
Continuous
Auto
Manual
Focus lock
Yes
Can be locked by pressing shutter-release button halfway
Can be locked by pressing shutter-release button halfway
Focus point selection
Auto (27 points)
Manual zone
Expanded area (S, M, L)
Spot
Center spot
Manual zone
Expanded area (S, M, L)
Spot
Center spot
Autofocus micro adjustment
Yes
AF assist light
Yes
Exposure metering
Metering
TTL metering
86000 pixel RGB sensor
86000 pixel RGB sensor
Metering range
-3 – 20 EV
Modes
Multi-segment (evaluative)
Center weighted average
Spot
Center weighted average
Spot
AE lock
Yes
Assignable to AF/AE-L button through the menu
Assignable to AF/AE-L button through the menu
Exposure compensation
±5 EV
1/3 or 1/2 EV increments
1/3 or 1/2 EV increments
Exposure bracketing
2, 3 or 5 frames
±2 EV
1/3 or 1/2 EV increments
±2 EV
1/3 or 1/2 EV increments
Shutter
Shutter
Electronically-controlled
Vertical-travel focal-plane shutter
Vertical-travel focal-plane shutter
Shutter speed
1/8000 – 30 sec
Bulb
1/3 or 1/2 EV increments
Bulb
1/3 or 1/2 EV increments
Shooting
Exposure modes
Auto
Program
Aperture priority
Shutter priority
Sensitivity priority
Shutter and aperture priority
Manual (metered)
Bulb
X (flash x-sync speed)
User (3)
Movie
Program
Aperture priority
Shutter priority
Sensitivity priority
Shutter and aperture priority
Manual (metered)
Bulb
X (flash x-sync speed)
User (3)
Movie
Scene modes
Yes
Drive modes
Single
Continuous (High)
Continuous (Medium)
Continuous (Low)
Self-timer 2 sec
Self-timer 12 sec
Remote control (No delay)
Remote (3 sec)
Remote (Continuous)
HDR capture
Multi-exposure (2 - 2000 images)
Interval shooting (up to 200 shots, 2 sec - 24 hours interval, time delay available)
Exposure bracketing
Särikahveldus viivisega
Särikahveldus distantspäästikuga
Continuous (High)
Continuous (Medium)
Continuous (Low)
Self-timer 2 sec
Self-timer 12 sec
Remote control (No delay)
Remote (3 sec)
Remote (Continuous)
HDR capture
Multi-exposure (2 - 2000 images)
Interval shooting (up to 200 shots, 2 sec - 24 hours interval, time delay available)
Exposure bracketing
Särikahveldus viivisega
Särikahveldus distantspäästikuga
Digital filters
Yes
Still image continuous shooting
8.3 fps
JPEG: up to 60 frames
RAW: up to 23 frames
4.5 fps [Medium]
JPEG: up to 100 frames
RAW: up to 32 frames
3 fps [Low]
JPEG: up to 200 frames
RAW: up to 52 frames
JPEG: up to 60 frames
RAW: up to 23 frames
4.5 fps [Medium]
JPEG: up to 100 frames
RAW: up to 32 frames
3 fps [Low]
JPEG: up to 200 frames
RAW: up to 52 frames
JPEG+RAW
Yes
White balance
White balance metering
System combining CMOS image and light source detection sensors
White balance modes
Auto
Daylight
Cloudy
Shade
Fluorescent (4)
Tungsten
Flash
CTE
Manual (up to 3 settings)
Color temperature configuration (up to 3 settings, adjustable ±7 steps on A-B or G-M axis)
Copying the white balance from image
Daylight
Cloudy
Shade
Fluorescent (4)
Tungsten
Flash
CTE
Manual (up to 3 settings)
Color temperature configuration (up to 3 settings, adjustable ±7 steps on A-B or G-M axis)
Copying the white balance from image
Movie recording
Video recording
Full HD 1920 × 1080
Video resolution
[FullHD] 1920 × 1080 60i/50i
Other formats
[FullHD] 1920 × 1080 30p/25p
[FullHD] 1920 × 1080 24p
[HD] 1280 × 720 60p/50p
[HD] 1280 × 720 30p/25p
[HD] 1280 × 720 24p
[FullHD] 1920 × 1080 24p
[HD] 1280 × 720 60p/50p
[HD] 1280 × 720 30p/25p
[HD] 1280 × 720 24p
Duration
25 minutes (max)
Automatically stops recording if the internal temperature of the camera becomes high
Automatically stops recording if the internal temperature of the camera becomes high
Microphone
Built-in monoaural microphone
File types
JPEG
EXIF 2.3
DCF 2.0
DCF 2.0
RAW
PEF
DNG
14 bit lossless compression
DNG
14 bit lossless compression
Movie format
MOV (Video: H.264/MPEG-4 AVC; Audio: Linear PCM stereo)
AVI (Video: Motion JPEG; Audio: Linear PCM stereo)
AVI (Video: Motion JPEG; Audio: Linear PCM stereo)
Viewfinder
Viewfinder
Optical
Viewfinder type
Eye-level pentaprism
Coverage
100%
Magnification
0.95×
Dioptre correction
-2.5 – +1.5
Focusing screen
Natural Bright Matte III
Depth of field preview
Yes
LCD monitor
Display type
TFT LCD
AR (anti-reflection) coating
Air-gapless glass
AR (anti-reflection) coating
Air-gapless glass
Display size (inches)
3.2
Screen dots
1 037 000
Articulation
Fixed
Touch screen
No
Coverage
100%
Viewing angle
170°
Adjustments
Brightness
Saturation
Saturation
Live View
Yes
Storage
Memory card slots
2
Memory card type
SD
SDHC
SDXC (UHS-I)
SDHC
SDXC (UHS-I)
Other
Slot 2 can be used for overflow or backup storage or for separate storage of copies created using RAW+JPEG
Pictures can be copied between cards
Eye-Fi card support
FLU card support
Photos can be copied between cards
Eye-Fi compatible
FLU card compatible
Pictures can be copied between cards
Eye-Fi card support
FLU card support
Photos can be copied between cards
Eye-Fi compatible
FLU card compatible
Flash
Flash modes
Auto
Flash on
Flash off
Slow sync
High speed sync
Rear curtain sync
Manual
Red-eye reduction
Wireless
Flash on
Flash off
Slow sync
High speed sync
Rear curtain sync
Manual
Red-eye reduction
Wireless
Flash exposure compensation
-2 – +1 EV
1/2 EV increments
1/2 EV increments
External flash
External flashguns with P-TTL support
Flashguns with standard hot shoe in manual mode
Flashguns with standard hot shoe in manual mode
Hot shoe
Yes
ISO 518 standard hot shoe
ISO 518 standard hot shoe
X-Sync
1/180 sec
Interface
USB
microUSB 3.1
Video
microHDMI (Type D)
Sound
3.5 mm microphone input
3.5 mm headphones out
3.5 mm headphones out
Remote controller interface
2.5 mm
Remote control
Pentax cable switch CS-205
Pentax remote control O-RC1
Pentax remote control O-RC1
Wireless
With Eye-Fi or FLU memory card
Other connections
PC terminal
Features
GPS
Yes
Electronic level
Yes (dual axis, can be displayed on screen or viewfinder)
Panorama
No
HDR
Yes
Time lapse
Yes
2 sec to 24 hrs interval
Up to 2000 shots
Time delay available
2 sec to 24 hrs interval
Up to 2000 shots
Time delay available
Power source
Battery
D-LI90 lithium battery
Battery life
720 kaadrit (CIPA)
External power source
AC adapter K-AC132
Battery grip model
Pentax Battery Grip D-BG5
Body
Materials
Magnesium alloy body
Stainless steel chassis
Stainless steel chassis
Weather sealing
Dust- and weatherproof (92 special sealing parts)
Color
Black
Height (mm)
99.1
Width (mm)
132.1
Depth (mm)
78.7
Weight (body only)
714.4
Weight (with battery and memory card)
799.5
Kit
Body only
Package contents
Lithium battery D-LI90
Battery Charger Kit K-BC90U
Shoulder strap
AC plug cord
ME viewfinder cap
Neck strap O-ST132
Body mount cover
Body mount cover
Battery grip terminal cover
Software CD-ROM S-SW160
Battery Charger Kit K-BC90U
Shoulder strap
AC plug cord
ME viewfinder cap
Neck strap O-ST132
Body mount cover
Body mount cover
Battery grip terminal cover
Software CD-ROM S-SW160
Product codes
EAN
0027075293977
027075293977
6177472293972
027075293977
6177472293972
Manufacturer code
16159
Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.
For this product you can select the desired delivery method at the shopping cart:
Photopoint store Pick-up
Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.
The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.
Omniva parcel terminal
You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.
See Omniva Parcel terminal locations here.
SmartPOST parcel terminal
Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.
See SmartPOST parcel terminal locations here.
DPD parcel locker
Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.
See DPD parcel locker locations here.
Smartpost Finland parcel terminal
SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.
See SmartPOST Finland parcel terminal locations here.
Matkahuolto parcel service
Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.
See Matkahuolto outlet locations here.
Omniva courier delivery
The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment.
The product is out of stock. For additional availability and preorder information please contact us here.
This product is available for rent from the following Photopoint retail stores:
Photopoint, Rocca al Mare: Paldiski mnt 102, Tallinn
| Rental prices | |
|---|---|
| 1 day | 20 € |
| 1 week | 60 € |
| 2 weeks | 100 € |
Read rental conditions here