be quiet! Light Base 900 FX white

229,99 €

Monthly payment starting from 7,84 €

Open installments calculator

Photopoint hire purchase calculator

Please add some items to your shopping cart and choose "hire purchase" for the payment type

Main info

The Light Base 900 FX is made for a grand entrance. Nothing proves this more than the massive ARGB LED strip that is visible from every angle. The 3m long strip consists of 172 LEDs. With ARGB control and the ability to synchronize the lighting with the mainboard, you can turn the Light Base 900 FX into your very own case. The case has 4 pre-installed Light Wings fans. The fan on the back works as an air outlet, 3 Light Wings 140mm PWM with inverted fan blades are pre-mounted on the side. These fans ensure that your system remains a real eye-catcher. The 7 airflow-optimized fan blades not only reduce noise-causing air turbulence. They also ensure that the fans deliver the required performance even under demanding conditions. With its removable feet, you can literally invert this case in seconds. You can also position it horizontally, which is just as quick. You can add up to 6 more fans to the 4 pre-installed fans, allowing you to install up to 10 fans. This makes Light Base 900 FX extremely flexible. Thanks to its extra spacious design, the case can also accommodate up to two 420mm radiators, an E-ATX motherboard and even the most powerful graphics cards at the same time. Thanks to its 2-chamber design, drives and cables are cleverly mounted on the back and enable strong airflow. The removable radiator and fan mounts in the lid and on the bottom make installing your setup extremely easy. Each mount can accommodate a radiator up to 420mm. You can also install another 360mm radiator on the side, allowing you to install an incredible 3 radiators at the same time. Light Base 900 FX has 2 ARGB and PWM hubs with a total of 12 connections. Their positions at the top and bottom of the case allow you to easily connect your hardware. The case comes with a flexible graphics card holder that subtly prevents your graphics card from sinking. The best part: The graphics card holder works in all directions, with both horizontally and vertically installed GPUs. This means that your system looks tidy even with the heaviest hardware.


type big tower case
color white
EAN 4260052191781
Manufacturer No. BGW72
Light Base 900 series
Big-Tower design
motherboard form factor E-ATX
Material steel, tempered glass, ABS
Window Kit Yes
Internal dimensions Plug-in card length maximum 495 mm
Supported Radiators Top: 120/140/240/280/360/420mm, Side: 120/140/240/280/360mm, Back: 120/140mm, Bottom: 120/140/240/280/360/420mm.
Drive bays 3.5 inch internal 1 piece
Slots Full-Size 8 pieces
Front connections 2x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s)
Back 1 x Light Wings140 mm PWM fan pre-installed, alternatively 1 x 120 mm fan can be installed.
Notes Dust filters: top, side & bottom, top: 3 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed, side: 3 x Light Wings Reversed 140 mm fans pre-installed, alternatively 3 x 120 mm fans can be installed, bottom: 3 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed.
Lighting Yes, RGB
RGB connectors addressable RGB Header
RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED
Water cooling possible Yes
Rear connection of the mainboard Yes
Feature Supports motherboards with backside connector designs (Asus BTF, MSI Project Zero and Gigabyte Project Stealth)
More information Maximum PCI slots with vertical graphics card: 4 slots
Note installation slots: 3.5" Max: 2 x (1 x included), 2.5" Max: 6 x (4 x included)
Accessories included 4 x Light Wings Reversed 140mm fans, screw set, additional spacer, cable ties, VGA bracket, VGA bracket for inverted layout.
volume 89 l
Dimensions Width: 34.4 cm x Height: 48.4 cm x Depth/Length: 53.2 cm
Weight 16.8 kg

Dimensions and weights

Gross weight
18.35 kg

Product codes

EAN
4260052191781
Manufacturer code
BGW72

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

The product can only be ordered from our online store and it takes from 12-17 working days for delivery within Estonia.

Product comparison

Close