DJI Matrice 100

Main info

  • Stable & flexible platform
  • Expansion bays for customization
  • Easily adjustable
  • Dedicated controller
  • Integrated Lightbridge technology

Product has been archived

Expansion bays
Additional expansion bays allow you to add components, customize the payload, and fly with any devices you want. Put cameras, sensors, computing boards, communication tools, and more into the sky, and gather data while completing complex jobs from a birds-eye view.

Universal power and communication ports
Connect and fly with a range of DJI or third party devices, and transmit data to the ground in real time. The Matrice 100 has dual parallel CAN ports for connecting DJI devices including the Guidance sensor system and dual parallel UART ports for connecting third party components of your choice. Now it is easy to mount your own equipment and put it into the sky.

Dual battery compartments
Add an additional battery compartment to achieve up to 40 minutes of flight time. This gives greater power to both your platform and any additional devices or accessories that you wish to fly with.

Customizable mounting and balancing
Achieve perfect balance and an ideal flight experience by sliding the battery and other compartments around the body of your Matrice 100. Put your components exactly where you want them, and get the most out of your system.

Adjustable arm angle for greater torque
Flexible to match your flight needs, adjusting the arm angle of each of the 4 arms is quick and easy. Achieve increased yaw torque and greater response by tilting the arms to a 3 degree angle.

50% less vibrations, rigid, strong system
To reduce vibrations, increase stiffness, and bring unmatched reliability, your Matrice 100 is made of strong, lightweight carbon fiber. Each of the arms contains DJI’s new soft vibration absorbing material that virtually eliminates feedback from the powerful motors, keeping your critical components stable and allowing unprecedented accuracy.

Responsive, quick release landing pads
Innovative landing pads or “feet” are installed at the base of each arm to protect your Matrice 100 when landing. These pads greatly reduce impact, protecting your system and eliminating the chance of your platform unintentionally lifting off of the ground. Also easy and quick to remove for replacement or upgrades.

Dedicated remote controller
Take control of your platform with the customizable, long-range remote controller included with the Matrice 100. With an operating distance of up to 2km, a rechargeable battery, fully adjustable controls, and outputs to connect to your mobile device, this is the perfect tool to command your system in the air.

Full mobile app support
Fly with the feature-rich DJI Pilot app or create your own app with the DJI SDK. See a live view, control your devices, access a real-time map, and more by simply plugging in your tablet or smartphone.

Enhanced GPS
Enhanced GPS with a foldable mount helps you to track your Matrice 100’s position in real time, while enabling faster satellite acquisition, more accurate position holding and flight planning.

Upgraded flight controller and integrated Lightbridge
DJI’s new N1 flight controller keeps your Matrice 100 stable and responsive to your commands throughout every flight. Transmitting data to you and bringing a live HD view (when using DJI’s X3 Camera and gimbal), the included DJI Lightbridge increases your flight range to 2km.

Purpose-built propulsion system
An upgraded version of the respected DJI E800 electric propulsion system powers your Matrice 100 and keeps it in flight. Four powerful, brushless motors and four lightning fast Electronic Speed Controllers are integrated into the platform, giving you complete control during flight. With increased strength and payload capacity, you have the flexibility to create the system you need.

Structure
  • Diagonal wheelbase: 650 mm
  • Weight (with TB47D battery): 2355 g
  • Weight (with TB48D battery): 2431 g
  • Maximal takeoff weight: 3400 g
  • Expansion bay weight: 45 g
  • Battery compartment weight: 160 g
  • Zenmuse X3 gimbal with camera weight: 247 g

Performance
  • Hovering accuracy (P-Mode With GPS): vertical: 0.5 m; horizontal: 2.5 m
  • Maximum angular velocity: pitch: 300°/s; yaw: 150°/s
  • Maximum tilt angle: 35°
  • Maximum speed of ascent: 5 m/s
  • Maximum speed of descent: 4 m/s
  • Maximum wind resistance: 10 m/s
  • Maximum speed: 22 m/s (ATTI mode, no payload, no wind); 17 m/s (GPS mode, no payload, no wind)
  • Hovering time (with TB47D battery): no payload: 22 min; 500g payload: 17 min; 1 kg payload: 13 min
  • Hovering time (with TB48D battery): no payload: 28 min; 500g payload: 20 min; 1 kg payload: 16 min
  • Hovering tme (with two TB47D batteries): no payload: 33 min
  • Hovering time (with two TB48D battery): no payload: 40 min
  • Hovering time (with TB47D battery and Zenmuse X3): no payload: 19 min
  • Hovering time (with TB48D battery and Zenmuse X3): no payload: 23 min

Propulsion system
  • Motor model: DJI 3510
  • Propeller model: DJI 1345s
  • ESC model: DJI E SERIES 620D
  • Flight control system model: N1

Other
  • Operating temperature: -10°C - 40°C

Remote
  • Controller name: C1
  • Operating frequency: 5.725~5.825 GHz
  • 922.7MHz~927.7 MHz (Japan)
  • 2.400~2.483 GHz (Lightbridge)
  • Transmission distance: 2 km (outdoors and unobstructed)
  • EIRP: 10dBm@900M 
  • 13dBm@5.8G 
  • 20dBm@2.4G
  • Video output: USB, Mini-HDMI
  • Power Supply Built-in battery
  • Charger: DJI approved charger
  • Dual users capability: Master-and-Slave control
  • Mobile device holder: Supports smartphones and tablets
  • Output power: 9 W
  • Operating temperature: -10°C - 40°C
  • Storage Temperature: < 3 months: -20°C to 45°C; > 3 months: 22°C to 28°C
  • Charging Temperature: 0°C -40°C
  • Battery: 6000 mAh LiPo 2S
  • Max mobile device width: 170 mm

Charger
  • Model: A14-100P1A
  • Voltage Output: 26.3 V
  • Power Rating: 100 W

Battery (standard)
  • Name: Intelligent Flight Battery
  • Model: TB47D
  • Capacity: 4500 mAh
  • Voltage: 22.2 V
  • Type: LiPo 6S
  • Energy: 99.9 Wh
  • Net Weight: 600 g
  • Operating temperature: -10°C - 40°C
  • Storage temperature: < 3 months: -20°C - 45°C; > 3 months: 22°C - 28°C
  • Charging temperature: 0°C - 40°C
  • Maximum charging power: 180 W

Battery (optional)
  • Name: Intelligent Flight Battery
  • Model: TB48D
  • Capacity: 5700 mAh
  • Voltage: 22.8 V
  • Type: LiPo 6S
  • Energy: 129.96 Wh
  • Net weight: 676 g
  • Operating Temperature: -10°C - 40°C
  • Storage temperature: < 3 months: -20° - 45°C; > 3 months: 22° to 28°C
  • Charging temperature: 0°C - 40°C
  • Max. Charging Power 180 W

Product codes

EAN
6958265118258
Manufacturer code
CP.TP.000028

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal 

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD parcel locker

Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.

See DPD parcel locker locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

The product is out of stock. For additional availability and preorder information please contact us here.

Product comparison

Close