DJI Phantom 4 Pro

Main info

  • 4K UHD 3840 × 2160 60p/50p video recording
  • 1-inch 20MP Exmor R CMOS sensor
  • Control range up to 7 km
  • 5 direction obstacle sensing
  • Flight time up to 30 minutes

Product has been archived

DJI Phantom 4 Pro
An uprated camera is equipped with a 1-inch 20-megapixel sensor capable of shooting 4K/60fps video and Burst Mode stills at 14 fps.
The adoption of titanium alloy and magnesium alloy construction increases the rigidity of the airframe and reduces weight, making the
Phantom 4 Pro similar in weight to the Phantom 4. The FlightAutonomy system adds dual rear vision sensors and infrared
sensing systems for a total of 5-direction of obstacle sensing and 4-direction of obstacle avoidance.

Camera with 1-inch 20MP sensor
The onboard camera has been redesigned to use a 1-inch 20-megapixel CMOS sensor. A custom engineered lens made up of eight elements is arranged in seven groups, it is the first DJI camera to use a mechanical shutter, eliminating rolling shutter distortion which can occur when taking images of fast moving subjects or when flying at high speed. In effect, it is as powerful as many traditional ground cameras. More powerful video processing supports H.264 4K videos at 60fps or H.265 4K at 30fps, both with a 100Mbps bitrate. Advanced sensors and processors ensure everything is captured with more image detail and the image data needed for advanced post-production.

5-direction of obstacle sensing
FlightAutonomy is expanded with an additional set of high-resolution stereo vision sensors placed at the rear in addition to the pair placed at the front as well as infrared sensing systems placed on the left and right sides. This network creates a total of 5-direction of obstacle sensing and 4-direction of obstacle avoidance, protecting the Phantom 4 Pro from more obstacles and giving filmmakers the confidence to capture more complex images.

New controller
The Phantom 4 Pro controller integrates an upgraded Lightbridge HD video transmission system that adds 5.8 GHz transmission support. The ability to choose between 2.4GHz and 5.8GHz allows pilots to cut through interference and eliminates image lag caused when flying in an area with extensive 2.4GHz frequency use.

New intelligents flight features

Draw is a brand new technology for waypoint control. Simply draw a route on screen and the Phantom 4 Pro will move in that direction while keeping its altitude locked. This allows the pilot to focus on camera control and enables more complex shots. There are two Draw modes that can be used in different scenarios.

Following fast-moving objects can be very challenging, but advanced image recognition algorithms used by the Phantom 4 Pro allow it to recognize and track the object while keeping it in frame. This new algorithm also recognizes more subjects, from people to vehicles to animals, and will adjust its flight dynamics to match, ensuring smoother shots.

Fly in any direction visible on-screen with a simple tap. Tap anywhere on-screen to smoothly adjust the direction of flight while automatically avoiding obstacles and tap the screen again or use control sticks to change direction. A new AR route function shows the aircraft’s real-time flight direction for reference as its route is adjusted.

Return to Home
In its upgraded Return to Home mode, the Phantom 4 Pro can automatically choose the best route to return home depending on environmental conditions. It records its route as it flies, allowing it to return along the same route avoiding obstacles if the control signal is disconnected.

Gesture Mode
Using Gesture Mode, selfies can be captured easily using a few gestures without the remote controller. Advanced computer vision technology allows the Phantom 4 Pro to take instructions through gestures. The subject simply lifts their arms when facing the camera and the aircraft will recognize this movement by locking on and placing the subject in the center of the frame.


Aircraft model
Phantom 4 Pro
Weight (with battery, g)
Hovering accuracy (GPS mode)
Vertical: ±10 cm
Horizontal: ±30 cm
Maximum tilt angle
Maximum ascent speed
6 m/s
Maximum descent speed
4 m/s
Maximum speed
72 km/h
Maximum flight altitude
6000 m (above sea level)
Maximum flight time
up to 30 minutes
Propeller model
DJI 9450S
Indoor hovering
With Vision positioning
Operating temperature
0 – 40 °C
Diagonal distance
350 mm


Angular vibration range
Controllable range
-90° – 30°


Sensor type
Exmor R™ CMOS
Sensor size
Total megapixels
Effective megapixels
Largest image size
5472 × 3648
100 – 12 800
Still image file type
Movie format
MP4 (Video: AVC / H.264)
MOV (H.265/HEVC)
100 Mbps
Video resolution
[4K cin] 4096 × 2160 50p
[4K UHD] 3840 × 2160 60p/50p
Other formats
[4K cin] 4096 × 2160 24p
[4K UHD] 3840 × 2160 24p
[2.7K] 2704 × 1520 30p/25p
[2.7K] 2704 × 1520 60p/50p
[2.7K] 2704 × 1520 48p
[FullHD] 1920 × 1080 30p/25p
[FullHD] 1920 × 1080 60p/50p
[FullHD] 1920 × 1080 120p
[HD] 1280 × 720 30p/25p
[HD] 1280 × 720 60p/50p
[HD] 1280 × 720 120p
Drive modes
Interval timer
Focal length (35mm camera equivalent)
24 mm
Field of view
Mechanical sutter
Shutter speed
1/8000 – 8 sec (electronic)
1/2000 – 8 sec (mechanical)
Manual focus
Recording media
Memory Card
Memory card type
microSDHC (UHS-I)
microSDXC (UHS-I)
Supported file systems
Operating temperature
0 – 40 °C

Remote control

Operating frequency
2.400 – 2.483 GHz
5.725 – 5.825 GHz
Transmitting distance (outdoor and unobstructed)
FCC: 7000 m
CE: 3500 m
Video output port
Power source
Lithium battery
Mobile device holder
For tablet or phone
Operating temperature
0 – 40 °C
6000 mAh LiPo 2S
Working voltage
7.4 V; 1.2 A


Output voltage
17.4 V
Output power
100 W

Standard battery

Battery name
Intelligent Flight Battery
Battery model
5870 mAh
Battery type
LiPo 4S
15.2 V
468 g
Charging temperature
-10 – 40 °C
Max charging power
100 W

Vision positioning

Velocity range
Less than 13.8 m/s (when 2 m above ground)
Altitude range
0 – 1000 cm
Operating environment:
Surface with clear pattern and adequate lighting (Lux > 15)
Operating range
0 – 1000 cm


Package contents
DJI Phantom 4 Pro
Remote control
Intelligent Flight Battery
8 × propellers
Battery charger
Power cable
Gimbal clamp
AC adapter
microUSB cable
16 GB microSDHC memory card

App / Live view

Mobile app
Suitable operating systems
Android 4.1.2 or later
iOS 8.0 or later

Product codes

Manufacturer code

Photopoint offers free shipping for orders over 59€ delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up

Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 59€. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD ParcelShop

Make sure you check out also the locations of DPD ParcelShops. These are located also in smaller Estonian towns. The delivery is the same. As the shipment arrives to the selected ParcelShop, you will be sent an SMS-notification. Go to the terminal, show your ID and take your package.

See DPD ParcelShop locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

The product is out of stock. For additional availability and preorder information please contact us here.

Product comparison