Home page » Photo»Lightning»Flashlights»Yongnuo flash Speedlite YN560 IV (V2018)

Yongnuo flash Speedlite YN560 IV (V2018)

Main info

Yongnuo YN560 IV (2018 version) is another scene of one of the best-selling manual flash in the manufacturer. Advanced design, a built-in radio receiver is an ideal choice for lovers of strobingu and reportage. Version V2018 is equipped with also a m

Product has been archived

Yongnuo YN560 IV (2018 version) is another scene of one of the best-selling manual flash in the manufacturer. Advanced design, a built-in radio receiver is an ideal choice for lovers of strobingu and reportage. Version V2018 is equipped with also a micro USB port for updating the software. The power and precision Flash YN560 IV is characterized by a high guide number flash GN of 58 high power and a wide range of adjustment (range 1 / 1 to 1/128, with 1/3 EV step) allow precise adjustment of flash output to the existing lighting conditions. modes Flash offers two operating modes: manual and strobe. - Manual mode (M) gives the user complete control over the parameters of the lamp. In manual mode, the power level is set manually by the user. - strobe mode (Multi) allows you to perform a series of flashes in a single exposure, thanks to him, you can create creative photographs showing the movement in the scene. Many methods trigger The new version of the flash fires can Yongnuo YN560 be a number of ways: - foot ISO - lamp attached with a hot shoe on the sled directly camera or release radio bearers. - PC interface - using a traditional cable connector PC sync. - Traditional flash trigger (modes S1 and S2), - using the photocell reacts to the first flash another flash (S1) or in addition, measuring pre-flashes automatically omitting another flash (S2). - radio systems trigger flash Yongnuo RF602 and RF603 - using the built-in module. The radio flash trigger Built-in radio module enables communication with other lamps triggers and operating systems Yongnuo RF602 and RF603. Remote triggering the flash lamp by means of radio waves in the 2.4 GHz provides greater than that of the optical trigger range (100 m). Triggered the flash does not need to "see" the flash control, so it can be hidden behind the scenes elements. Another advantage of the radio communication is the ability to remotely control the settings of multiple flash lamp interface operating in master mode. Slave mode (RX), Yongnuo YN560 IV V2018 can work on one of the 16 available channels of communication and one of the 18 groups. This allows precise control of multiple flash "connected" in the group, as well as work freely in space shared with other photographers working on similar radio systems. As the lamp slave YN560 IV can be triggered by a radio signal from lamp YN720, YN660, YN560 IV and triggers YN560TX, RF602, RF603. The role of the Master unit (TX) lamp YN560 IV V2018 control can work lamp YN720, YN685, YN660, YN560 IV, III YN560 arranged in three groups on one of 16 available channels, radio communication. Sync on both curtain mode enables creative use of flash effect at the beginning or end of the exposure. Flash Yongnuo YN560 VI offers flash synchronization with both the first and second curtain, which allows a significant impact on the nature of the pictures. Liberation second curtain flash (at the end of exposure) captures the effect of motion for an object, for example. Smudges for the vehicle occupants. If flashes on the first curtain (early exposure) registered by the light blur zastanemu in front of the moving object in the scene. The light of a different nature The design of the flash Yongnuo YN560 IV allows quick and easy development of character the light generated by it. The movable head with manual zoom function, built-in diffuser and reflector enables creative style to modify the generated light to the needs of the selected scene. Willingness to work at any time lamp used in energy management systems allow to shorten the time between flashes (at full output and the primary power supply) to just three seconds, so that the flash is ready to work in almost any time. Universal power supply source of journalistic flash Yongnuo YN560 IV are four cells (batteries) AA. Compatibility with popular "fingers" commonly available makes the lamp can operate virtually anywhere in the world. Additionally, to optimize the lamp is equipped with the power saving function, which in the case of a long idle automatically turns off the lamp. Additional power supply In order to further improve the device performance, it can be connected to external power bank or tray batteries, such as SF18C or SF17C. Additional external power supply can extend the operating time without having to replace the batteries and shorten the time needed to recharge the flash next. Simple control Backlit LCD display with high contrast and intuitive, easy to navigate menus allow easy navigation through the functions lamp. Large, well exposed buttons for ease of use, even in low light. The lamp system also offers optional signal to indicate the status. Long service YN560 IV elements are made of high quality materials ensure long life flash. Advanced system protects the device from overheating. If you notice an elevated temperature protection mechanism components notify the user, and then reduce the available functions lamps, thus protecting the lamp against damage. Full compatibility Mini USB port, allowing firmware upgrade provides compatibility with the new lamp models devices. Specification - guide number GN 58 (ISO 100, 105 mm) - control FV: 1/128 - 1/1 1/3 EV - operating modes: manual / stroboscopic - triggering methods: - ISO footer - sledding camera or trigger the radio - PC interface - the traditional triggering flash (S1 and S2)

Product codes

EAN
6947110911014
Manufacturer code
9159

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal 

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD parcel locker

Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.

See DPD parcel locker locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

The product is out of stock. For additional availability and preorder information please contact us here.

Product comparison

Close