Yongnuo YN560-TX II Radio Controller for Sony

Main info

Yongnuo YN560-TX II is a radio controller for remote flash triggering and parameter control of flashes compatible with Yongnuo RF602 and RF603 system (YN560 III, YN560 IV, YN660, YN860Li). The presented model is compatible with Sony cameras. The devi

Product has been archived

Yongnuo YN560-TX II is a radio controller for remote flash triggering and parameter control of flashes compatible with Yongnuo RF602 and RF603 system (YN560 III, YN560 IV, YN660, YN860Li). The presented model is compatible with Sony cameras. The device is distinguished by a large, easy-to-read LCD display, which faces the photographer directly. The controller is powered by 2 AA batteries or rechargeable batteries. It allows 16-channel, 2.4 GHz operation and management of up to 6 flash groups. It also offers 2 different flash modes: M (manual) and Multi (strobe). You can also control flash power and torch zoom from the device. Main Product Features radio controller compatible with Sony cameras 2.4 GHz radio signal frequency for communication range of up to 100 meters 16 operating channels 5 independent groups (A, B, C, D, E, F) flash triggering of lamps flash power control of lamps lamp torch zoom control set lamp mode (manual or strobe) management of lamp groups (up to 6 groups) select operation channel (16 channels available) equipped with a large, backlit LCD screen readable and well-described buttons Micro USB port for software updates Variety of applications The Yongnuo YN560-TX II radio controller for Sony can control up to 16 units divided into 6 groups. At the same time, the supported 2.4 GHz radio signal frequency will provide a communication range of up to 100 meters. Such parameters allow for elaborate and creative lighting setups. Two lamp operation modes The Yongnuo YN560-TX II radio controller will allow you to define how the lamp works. It allows you to choose between manual mode (M) and strobe mode (Multi). This gives the user full control over how the flash will react to trigger signals. The manual mode will allow you to fine-tune the flash power. Strobe mode is the doorway to creative experimentation. It allows you to use the strobe effect in photography. With this controller, you gain more flexibility and the ability to customize the flash operation for different applications. Large easy-to-read screen An easy-to-read display facing the photographer is the basis for comfortable and ergonomic work with a radio controller. The YN560-TX II for Sony features a backlit screen, well-described buttons and an intuitive interface. All these facilities are a guarantee of comfort and ease of use. Choosing this controller, you will easily manage a group of several or even a dozen lamps simultaneously! Convenient power supply The power source of the YN560-TX II radio controller for Sony is 2 standard cells (batteries or rechargeable batteries) of AA type. Compatibility with popular "sticks" makes you successfully use it anywhere in the world. Fast installation With the YN560-TX II Radio Controller for Sony you will easily take care of the ergonomics of work and order on the set. It features a quick shoe lock mechanism that prevents the device from accidentally being disconnected from the camera. This system also allows you to significantly speed up the installation of the device on the sled. Software update The YN560-TX II radio controller for Sony is equipped with a micro USB port. You can download the latest firmware from Yongnuo's official website. The manufacturer cares about the continuous development of its products, introducing new updates. The micro USB port will make sure you are always up to date! Specification model: Yongnuo YN560-TX II for Sony signal frequency: 2.4 GHz Trigger mode: manual M stroboscopic Multi available operating channels: 16 available lamp groups: 6 available range of torch zoom settings: 24 - 105 mm signal range: up to 100 m power supply: 2 x alkaline battery / AA type rechargeable battery (not included) trigger cable socket: micro Jack 2.5 mm (cable not included) strand-by operating time: 120 hours software update: via micro USB socket dimensions: 65.5 x 89 x 42 mm weight: 76 g Compatibility Sony brand cameras equipped with flash sockets Yongnuo flashes: (including YN560 III, YN560 IV, YN660, YN968N, YN860Li) Yongnuo radio triggers: (including YN602, YN603, YN603 II, YN605) Kit contents Yongnuo YN560-TX II radio controller for Sony

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal 

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD parcel locker

Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.

See DPD parcel locker locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

The product is out of stock. For additional availability and preorder information please contact us here.

Product comparison

Close