Home page » Photo»Lightning»Flashlights»Nissin flash Di622 Mark II for Canon

Nissin flash Di622 Mark II for Canon

Main info

Shoe mount flash for Canon E-TTL II supports digital and film SLR cameras

Product has been archived

1. Clip it on the camera.
2. Switch it on.
3. Release the shutter button.
The flash fires and its light is automatically controlled by the camera + flash TTL dedicated system.
Many photographers think of using a flash only at night or in poor lighting. However, a flash can be very useful in daylight too. Eliminate the shade under trees. Use fill-in lighting to sharpen the subject. Address catchlight in the eyes, and stop motion. Emphasize the lighting contrast. Enjoy more opportunities to use your flash.
Tired of your flash no longer working whenever a new camera comes onto the market ? A firmware upgrade service is available for the Di622 Mark II , which provides a service terminal to upload the latest software. A charge for the firmware update service will apply, varying depending on the area. Please check at your local dealer for details about the update service.

TTL FLASH
Di622 Mark II is compatible with Canon's E-TTL, E-TTLII system. Those new digital TTL flash systems control the flash light with greater precision and stability.

BOUNCE FLASH
The flash beam covers the frame from 14mm (with a wide angle diffuser built-in) to 70mm of the digital lens.(*) For a longer lens, the flash head reflector position stays at 70mm.
It turns 90 degrees upward and 270 degrees horizontally for bounce lighting.

The flash head also stores a small reflection panel for fill-in shots.
(*) The focal length for the traditional SLR camera is to be multiplied b a factor of 1.5.

WIRELESS REMOTE FLASH
Di622 Mark II has a wireless remote flash system as a slave unit.
You can enjoy creative flash photography with multiple lightings from the various directions. There are 3 slave modes provided.

TTL FLASH LEVEL COMPENSATION
The power of the flash can be controlled with TTL flash level compensation.
Whereas total exposure is controlled by the camera's EV compensation function, the flash can compensate for the exposure on the main subject only, with little impact on the exposure of the background scene.
The flash power level can be adjusted from -1.5EV through +1.5EV by 0.5EV steps.

NISSIN ORIGINAL “MY TTL” SETTING
The TTL flash power level is pre-set for exposure at factory. You can, however, reset
at the desired exposure level, in +/- 0.75 Ev. by 0.25 Ev increments.
The pre-set value is memorized as your personal standard after switching the unit
The usual TTL flash level compensation works based on this customized level.

X-Contact and External Synchro Contact
Di622 Mark II can be used without hotshoe cameras. Some cameras provide a flash synchronization contact at X-terminal instead of hotshoe. For this type of cameras, Di622 Mark II has a X-terminal socket for flash synchronization.

HIGH POWER
G.No.44(ISO 100) is obtained at the reflector position for 105mm focal length lens, and 45 at 35mm.

POWER ZOOM
The light distribution angle is automatically adjusted for the lens focal length. A high quality stepping motor sharply traces the lens movement with the same speed as that of the camera manufacturer's original flash model.

ENERGY SAVING SYSTEM
The Di622 Mark II has a dual energy saving system.
It automatically enters sleep mode when it's not in use for 5 min., and is reset with a touch of the shutter button or any button of the flash.
If the unit is not in use for 30 minutes, it will automatically power off.
With the flash unit set for slave mode, sleep mode is cancelled and the unit will not automatically turn off until 60 minutes have elapsed.

VARIABLE POWER
When selecting manual power operation, choose from one of the six variable powers for the best lighting effect.
The power level is provided from full power (G.No.44) down to 1/32nd power in 1.0Ev increments.

AF ASSIST BEAM
In darkness or dim light conditions, the Di622 Mark II beams a red light to create a sharp contrast to enable the camera's focus sensor to focus easily on the subject.

FLASH POWER LOCK SYSTEM
The Di622 Mark II is compatible with FE lock (Canon) system.
Refer to the camera owner's manual for details.

REAR CURTAIN SYNCHRO.
Some Canon camerra's set the flash for rear curtain synch. photography.
The Di622 Mark II follows the command signal of theses cameras.

Flash head

Guide number
44 (m, ISO 100)
Colour temperature
5600 K
Dedication
Canon EOS
Focal length coverage
24 – 105 mm
Coverage with wide panel
16 mm
Auto zoom
Yes
Integrated reflector card
Yes
Vertical swivel
90°
Horizontal swivel
270°
AF assist light
Yes

Display

Display type
N/A
Flash readiness indication
Yes

Flash modes

Auto exposure control
E-TTL
E-TTL-II
TTL flash control
Yes
TTL slave mode
Yes
Automatic flash mode
No
Manual flash mode
Yes (1 – 1/32 power)
Slave mode (manual)
Yes
Automatic fill-in flash
Yes
2nd curtain sync
Yes
High speed sync
No
Flash exposure compensation
Yes (-0.3 - +3 EV in 1/3 EV increments)
Flash bracketing
No

Power

Power source
4 × AA alkaline batteries or NiMH rechargable batteries
Alkaline-magnesium or lithium batteries
NiMH rechargeable batteries
Battery life
200 – 1500 flashes according to the mode (with alkaline batteries)
Recycle time
0.1 – 5 sec (depending on power source and flash power)
Energy saving mode
Yes
Auto off
Yes

General

Dimensions
74 × 134 × 103 mm
Weight
315 g
Body material
Plastic
Mounting foot material
Plastic
Package contents

Product codes

EAN
4938574622716

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal 

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD parcel locker

Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.

See DPD parcel locker locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

This product is in stock and ready for dispatch. Order now from Photopoint web store and this product will be on your doorstep in 1-2 working days.

This product is available to try and buy from the following Photopoint retail stores:

Photopoint, Kristiine keskus: Endla 45, Tallinn

Photopoint, Ülemiste keskus: Suur-Sõjamäe 4, Tallinn

Photopoint, Tartu Kaubamaja: Riia 1, Tartu

Photopoint, Rocca al Mare: Paldiski mnt 102, Tallinn

Photopoint, Kvartal: Riia 2, Tartu

Photopoint, Lõunakeskus: Lääneringtee 39, Tartu

NB! Retail store stock status is not in real time and does not consider reservations. For a detailed availability please contact the retail store.
Online orders may be delivered from another store. You will receive a notification when the goods are ready to be picked up.

Product comparison

Close