TP-Link SG6428XHP
26-957488
Main info
Omada L3 Stackable Managed Switch, 24 Gigabit PoE+ Ports, 4 10G SFP+ Slots 24 Gigabit RJ45 PoE+ Ports 4 10Gb/s SFP+ Slots PoE Power Supply with a Total Power of Up to 720W* Physical Stacking for Redundancy and Better Performance L3 Features: RIP, OSProduct has been archived
Omada L3 Stackable Managed Switch, 24 Gigabit PoE+ Ports, 4 10G SFP+ Slots
- 24 Gigabit RJ45 PoE+ Ports
- 4 10Gb/s SFP+ Slots
- PoE Power Supply with a Total Power of Up to 720W*
- Physical Stacking for Redundancy and Better Performance
- L3 Features: RIP, OSPF, ECMP, VRRP, PIM-DM, DHCP Server/Relay
- Security Strategies: ACL, Port Security, DoS Protection, 802.1X
- Increased Availability with Dual Power Supplies**, VRRP, and ERPS
- Centralized Cloud Management via the Omada SDN Controller
- Autonomous Management via Web Interface, CLI, SNMP, and RMON
*Total available PoE power depends on the power supply modules used. **The switch ships with one PSM500-AC power module. If you wish to use a second power supply slot, you must purchase an additional power supply separately.
Product Application
The Omada SG6428XHP is a managed Layer 3 PoE+ switch that offers L3 routing, high-speed 10 Gbps wire speed, stacking, and redundant power supply to meet the needs of the convergence layer. It offers an impressive total PoE power output of up to 720 W*, 24 Gigabit RJ45 PoE+ ports, 4 SFP+ slots, and physical stacking. Centralized management, high security, and extensive management features make this switch ideal for SMB, enterprise, and ISP applications.
IEEE 802.3at/af PoE Support
The 24 IEEE 802.3at/af PoE ports provide up to 720W of combined power for 802.3at and 802.3af devices*, each capable of delivering up to 30W of power. Easily install wireless access points, surveillance cameras, IP phones, and other PoE-enabled devices without the hassle and expense of additional power cabling. Perpetual PoE ensures uninterrupted power delivery to devices, even during switch reboots. Furthermore, the switch retains PoE power settings after reboot thanks to its fast PoE functionality.
High-speed connections and efficient stacking
24 Gigabit RJ45 ports and four 10 Gbps SFP+ slots provide up to 128 Gbps of switching capacity per unit. Physical stacking of up to 8 units strengthens the network structure with its efficiency and built-in redundancy.
Extensive Layer 3 Capabilities
The switch is equipped with multiple Layer 3 routing protocols to support network scalability. Static Routing, RIP, OSPF, ECMP, VRRP, DHCP Server, and DHCP Relay are supported. The PIM-DM multicast routing protocol ensures efficient routing for multicast groups.
High Availability
Hot-swappable, redundant power supplies with VRRP are an ideal choice for a reliable network architecture**. ERPS supports rapid protection and recovery in a ring topology.
Advanced Security Features
Network protection against a wide range of threats is provided by ACLs (IPv4 and IPv6), Dynamic ARP Inspection, IEEE 802.1X, MAB, Port Security, and Secure Shell (SSH).
Omada SDN
The Omada system offers centralized cloud management and numerous management features, such as Zero-Touch Provisioning (ZTP). The Omada software-defined network infrastructure (SDN) platform integrates network devices, including access points, switches, and gateways, providing completely centralized cloud management from a single interface.
In addition to centralized management via the Omada app, the SG6428XHP switch can also be easily managed via a web configuration page or command line interface (CLI). Both methods protect traffic using SSL or SSH encryption. SNMP (v1/v2c/v3) and RMON enable polling of the switch to obtain valuable information and send traps for unexpected events.
| Switch class | Managed |
| Application | Medium and large companies |
| Switch layer | L2 |
| Network architecture | GigabitEthernet |
| Number of 10/100 Mbps ports | None |
| Number of 10/100/1000 Mbps ports | 24 |
| 10/100/1000/2500 Mbps ports | None |
| Number of 10Gb ports | None |
| Number of ports 25Gb | None |
| Number of PoE ports (PoE & PoE+) | None |
| Number of PoE+ ports | None |
| Number of COMBO ports | None |
| Number of SFP ports | None |
| Number of SFP+ ports | 4 |
| Number of SFP56 ports | None |
| Number of QSFP+ ports | None |
| Console port | Yes |
| Throughput | 128 |
| Forwarding rate | 95.2 |
| Packet buffer | 3 |
| MAC address table size | 32000 |
| Support for Jumbo frames | Yes |
| Jumbo frame size | 9 |
| Stackability | Yes |
| Maximum number of units per stack | 8 |
| Number of VLAN groups | 4000 |
| Chassis type | Rack |
| Fan | Yes |
| Power supply | External |
| VLAN | Max. 4K VLAN groups (802.1q VLAN) 802.1Q VLAN tagging MAC VLAN entries: 200 Multicast VLAN Management VLAN VPN VLAN (QinQ): Max. 256 entries GVRP Protocol VLAN: Protocol template 16, Protocol VLAN 12 VPN VLAN Voice VLAN Private VLAN |
| Accessories included | SG6428XHP Power cord RJ45 console cable Quick installation guide Rack mounting kit Rubber feet |
| Dimensions | 440 × 420 × 44 mm |
| QoS | Class of Service: 8 Priority Queues Port Priority IEEE 802.1p Priority DSCP Priority Minimum Queue Bandwidth Scheduling Mode (SP, WRR, SP+WRR) Bandwidth Control: Rate Limiting Storm Control Voice VLANUser-Defined OUISmoother PerformanceFlow Performance: Q |
| Security | Port Isolation CPU Defense ARP Inspection (Dynamic ARP Inspection) DoS Attack Protection IP-MAC-Port Binding 1024 Entries DHCP Snooping ARP Inspection IPv4 Source Address Protection IPv6-MAC Port Binding 1024 Entries DHCPv6 Snooping ND Detection ND Snoopi |
| Management, monitoring, configuration | Graphical User Interface (GUI) Command Line Interface (CLI) via console port, Telnet SNMP v1/v2c/v3 Trap/Inform RMON (Groups 1, 2, 3, 9) SDM Template DHCP/BOOTP Client 802.1ab LLDP/LLDP-MED DHCP AutoInstall Dual Image, Dual Configuration CPU Usage Monitor |
| L2 features | Link Aggregation Spanning Tree Protocol Port- and VLAN-based loopback detection 802.3x flow control Support for 2048 IGMP groups ERPS Mirroring RSPAN MAC address table PIM-DM (IPv4) Multicast IGMP snooping MLD snooping L2 multicast table Fast Leave Multic |
| L3 features | IP Interfaces: IPv4: Maximum 256, IPv6: Maximum 256 Static Routing Maximum 1024, IPv6: Maximum 512 Host Route Table: Maximum 6100 entries RIP: Version v1/v2, Maximum 8190 OSPF: Version v2/v3; v2: Maximum 8190, v3: Maximum 4097 VRRP: Version v2/v3, Maximum |
| Environment requirements | Permissible operating temperature: -5°C to 45°C at an altitude of 2000 meters -5°C to 40°C at an altitude of 3000 meters Permissible storage temperature: -40°C to 70°CPermissible air humidity: 1090%, non-condensingPermissible storage humidity: 590%, non-c |
| Power supply | Two hot-swappable power module slots** (100-240 VAC, 50/60 Hz)**This unit ships with one PSM500-AC power module. A second redundant power supply must be purchased separately.Maximum power consumption: 42.9 W (110 V/60 Hz) (Without connected PoE devices) 9 |
| Data Act | Link |
Dimensions and weights
Product codes
Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.
For this product you can select the desired delivery method at the shopping cart:
Photopoint store Pick-up
Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.
The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.
Omniva parcel terminal
You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.
See Omniva Parcel terminal locations here.
SmartPOST parcel terminal
Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.
See SmartPOST parcel terminal locations here.
DPD parcel locker
Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.
See DPD parcel locker locations here.
Smartpost Finland parcel terminal
SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.
See SmartPOST Finland parcel terminal locations here.
Matkahuolto parcel service
Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.
See Matkahuolto outlet locations here.
Omniva courier delivery
The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment.