Home page » Computers & IT»Peripherals»UPS for workstations»UPS Keor SPE Rack 2U 1kVA

UPS Keor SPE Rack 2U 1kVA

Main info

Keor SPE Rack 2U 1.5kVA uninterruptible power supply Legrand KEOR SPE R/T 1500 is an uninterruptible UPS power supply made using Line interactive technology with a rated power of 1500VA - 1050W. The operation of the device is managed by a high-qualit

Product has been archived

Keor SPE Rack 2U 1.5kVA uninterruptible power supply

Legrand KEOR SPE R/T 1500 is an uninterruptible UPS power supply made using Line interactive technology with a rated power of 1500VA - 1050W. The operation of the device is managed by a high-quality, dedicated microprocessor. The power supply has the ability to run auto diagnostic tests and a cold start function. The KEOR SPE RT power supply can be used in both tower and rack configurations.

KEOR SPE R/T 1500 is equipped with hermetically sealed lead batteries with an adjustable valve, which guarantee a minimum backup time of 8 minutes at 80% load. The batteries can be easily replaced thanks to special covers located on the front of the UPS.

The presence of an electronic voltage stabilizer (AVR) in the power supply ensures high output voltage stability and effective protection against interference in the electrical network.

The UPS has a number of 2 x output sockets (4 x IEC320-C13), one group of sockets can be programmable. KEOR SPE R/T 1500 can be connected to a PC via an SNMP, USB or RS232 serial port, which allows for convenient monitoring of its operation using free software, as well as emergency shutdown of Windows and Linux operating systems.

The power supply has a 5-button control panel, an LCD screen and 3 LEDs for the power supply status:

  • GREEN: Correct operation. The load is secured.
  • YELLOW: The load is powered by the UPS battery, but the alarm is active, control is required.
  • RED: The load is not powered by the UPS. An emergency condition exists.

The LCD display allows you to read:

  • Operating mode
  • Measurement:

a) Input and output voltage/frequency

b) Active and apparent power

c) Load percentage

d) Battery voltage

e) Battery charge percentage

f) Hold time

g) Ambient temperature

  • Alarms and errors

The KEOR SPE R/T 1500 power supply is CE marked in accordance with Directives 2014/35 and 2014/30 and has been designed and built in accordance with the following standards:

  • EN 62040-1 "General and safety requirements for UPS units used in places accessible to the operator"
  • EN 62040-2 "Electromagnetic compatibility (EMC) requirements"
  • EN 62040-3 "Requirements for performance properties and test methods"

Apparent power 1500 VA
Active power 1050
UPS Architecture line-interactive
The shape of the output voltage Full sine wave
Number of phases input 1 (230V)
No. of batteries 6
Voltage 6
Battery capacity 7
Charging time 4
Chassis type Rack
Filters / protection Circuit
Filters / protection Against reverse current
Filters / protection Overload
Filters / protection Thermal
Input power ports IEC-C14
Output power ports 8 x IEC-C13
I/O connectors 1 x EPO
I/O connectors 1 x USB (Type B)
I/O connectors 1 x RS-232 (COM)
Color Black
Dimensions 440 x 44 x 557 mm (2U)
Weight 16.8
Data Act Link
Environment requirements Operating temperature (°C): 0 - 40 Relative humidity (%): 0-95 non-condensing Noise level at 1 m (dBA): below 40 Estimated content of materials from a circular economy: approximately 41% Recyclability rate calculated using the method described in Technica

Dimensions and weights

Gross weight
20 kg
Package width
50 cm
Package height
20 cm
Package length
61 cm

Product codes

EAN
3414972083423
Manufacturer code
AULGRL2U3110690

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal 

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD parcel locker

Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.

See DPD parcel locker locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

The product is out of stock. For additional availability and preorder information please contact us here.

Product comparison

Close