Home page » Photo»Recording media»Memory cards»GOODRAM SSD M.2 NVMe 2280 Gen3x4 interface 1TB EU SSDPR-PX500-01T-80-G2

GOODRAM SSD M.2 NVMe 2280 Gen3x4 interface 1TB EU SSDPR-PX500-01T-80-G2

Main info

Brand new original EU spec with EU warranty, retail pack

Product has been archived

By providing up to 4x better sequential and random transfer performance compared to SATA III Solid State Drives and lower latency than AHCI drives, GOODRAM PX500 gen.2 pumps-up your PC. The performance will improve the work of more demanding customers, offering a reading of up to 2050 MB/s. It is also perfect as a stand-alone drive, as well as an add-on to a hard disk in desktops and laptops. Available capacities for the PX500 gen.2 make the drive work in both roles. Features: High-speed PCIe gen. 3 x4 interface Wsparcie NVMe 1.3 3D NAND Flash technology Heat-dissipating thermal pad High performance By creating a disk based on efficient memory in 3D NAND technology, we managed to achieve sequential transfer parameters of up to 2050 MB/s for reading and 1650 MB/s for write. New possibilities with NVMe NVM Express communication protocol was designed from the ground up to achieve the potential of fast flash based storage media. By utilizing it in PX500 gen.2 SSD, we were able to extract the maximum performance from its memory, controller and PCIe gen. 3 x4 interface. NVMe drastically reduces latency and queuing to bring much better responsiveness vs. AHCI-based SSD. Heat under control One of the problems that concerns M.2 SSD format is the thermal throttling – limitation of efficiency due to too high ambient temperature. To get it under control, PX500 gen.2 have special coating consisting of copper and graphite. Thanks to this, we have obtained very good heat dissipation, without increasing the size of the disk. Technical specifications: Interface: M.2 PCIe NVMe gen. 3 x4 (M key) Form factor: M.2 size 2280 Memory chips: 3D NAND Flash MTBF: 2,000,000 hours Operating temperature: 0°C – 70°C Storage temperature: -45°C – 85°C Dimensions: 80 x 22 x 3.5 mm Sequential read performance (max.): 2050 MB/s Sequential write performance (max.): 1650 MB/s TBW (Total Bytes Written): 660 The capacity visible in the operating system: 953,87 GB

Product codes

EAN
5908267962633
Manufacturer code
SSDPR-PX500-01T-80-G2

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal 

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD parcel locker

Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.

See DPD parcel locker locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

The product is out of stock. For additional availability and preorder information please contact us here.

Product comparison

Close