Home page » Electronics»Smart home»Switches»Shelly Dimmer Gen3 WiFi Light Controller

Shelly Dimmer Gen3 WiFi Light Controller

46,99 €

Monthly payment starting from 1,41 €

Open installments calculator

Photopoint hire purchase calculator

Please add some items to your shopping cart and choose "hire purchase" for the payment type

Main info

Add to cart

Delivery in 4-7 working days

Delivery starting at 0 €

14 14 days return policy when purchasing online

Shelly Dimmer Gen3 WiFi Light Controller

The Shelly Dimmer Gen3 is a compact, single-circuit light dimmer that allows precise control of lighting brightness from a smartphone, tablet, computer or home automation system. It works over a Wi-Fi local network without the need for an additional hub, and also supports remote control via the cloud. It can work with or without a neutral wire. The device also offers Wi-Fi signal amplification, interoperability with Bluetooth and BLE Gateway, and a range of automation options, including schedules, scripts and integration with systems like Home Assistant, Google Home, Alexa or SmartThings.

Working with and without a neutral wire

The Shelly Dimmer Gen3 allows installation in both systems with and without a neutral wire, which is key when retrofitting existing installations. For operation without a neutral wire, a Bypass module is required if the load is less than 20 watts - such a solution prevents the lamp from accidentally glowing after it is turned off.

Accurate measurements and protection

When the neutral wire is connected, the device allows the measurement of voltage (180-240 V), current (0-3 A) and energy consumption. These measurements are made with an accuracy of ±5%. In addition, the device is equipped with an internal temperature sensor and short-circuit and overload protection. Note: these functions work properly only when connected with a neutral conductor.

Convenient control and precise dimming

The product supports trailing edge mode, which provides smooth dimming of a wide range of light sources - from LEDs (up to 150 W) to halogen bulbs (up to 200 W) and electronic transformers. Automatic dimmer calibration guarantees a uniform dimming effect regardless of the type of light source. Built-in functions such as minimum and maximum brightness setting, transition time adjustment and night mode allow full control over lighting - both manually and through schedules.

Automation and advanced schedules

Shelly Dimmer Gen3 supports up to 20 schedules and 20 webhooks (with 5 URLs for each). It allows you to create advanced scenarios using scripts and local actions. You can schedule brightness changes, transition times and set automatic light on/off. With support for MQTT, KVS and virtual components, deep integration with advanced building automation systems is possible.

General
Manufacturer Shelly
Model DimmerGen3
Physical parameters
Dimensions 38 x 42.5 x 16.5 mm / 1.50 x 1.67 × 0.65 inches
Weight 24.3 g / 0.86 oz
Maximum terminal tightening torque 0.4 Nm / 3.5 lbin
Cable cross section 0.2 to 2.5 mm² / 24 to 14 AWG (solid, multi-strand, sleeves)
Length of stripped wire 5 to 6 mm / 0.20 to 0.24 in.
Mounting Wall box
Housing material Plastic
Case color Green, print: black
Color of connectors Black
Environmental conditions
Operating temperature -20°C to 40°C / -5°F to 105°F
Operating humidity 30% to 70% RH
Maximum altitude. 2000 m / 6562 ft
Electrical parameters
Power supply 220-240 V~, 50 Hz
Power consumption < 1,5 W
No neutral wire Yes
Minimum load without neutral wire and without Bypass 20 W
Dimming type Trailing edge
External protection 16 A, characteristic B or C, 6 kA breaking capacity, energy limitation class 3
Short-circuit protection Yes
Output circuit parameters
Maximum output power 200 W
Sensors and measurements
Voltage range (AC) 180-240 V
Accuracy of voltage measurement ±5% (when used with neutral conductor)
Current range (AC) 0-3 A
Accuracy of current measurement ±5 % (when used with neutral conductor)
Internal temperature sensor Yes
Wi-Fi
Protocol 802.11 b/g/n
RF band 2412-2472 MHz
RF power < 20 dBm
Range Up to 30 m indoors / 50 m outdoors (depending on conditions)
Bluetooth
Protocol 4.2
RF band 2402-2480 MHz
Maximum RF power < 4 dBm
Range Up to 10 m indoors / 30 m outdoors (depending on conditions)
Microprocessor unit
CPU ESP32 C3 / STM32 G051
Clock frequency ESP32 C3 - 40 MHz
Flash memory 8 MB
Firmware features
Schedules 20
Webhooks (URL shares) 20 with 5 URLs per webhook
Scripts Yes
MQTT Yes
Advanced scheduling Yes
KVS (Key-Value Store) Yes

Dimensions and weights

Gross weight
0.04 kg
Package width
4 cm
Package height
2 cm
Package length
4.5 cm

Product codes

EAN
3800238070526
Manufacturer code
DimmerGen3

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal 

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD parcel locker

Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.

See DPD parcel locker locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

The product can only be ordered from our online store and it takes from 4-7 working days for delivery within Estonia.

Product comparison

Close