Home page » Electronics»Smart home»Thermostats»Thermo-Floor AS Heatit thermostat Z-Wave Plus

Thermo-Floor AS Heatit thermostat Z-Wave Plus

Main info

Thermo-Floor AS Heatit thermostat Z-Wave Plus, Black Warranty 24 month(s) Net weight

Product has been archived

Thermo-Floor AS Heatit thermostat Z-Wave Plus, Black
Warranty 24 month(s)
Net weight 0.16 kg
Gross weight 0.22 kg
Producer product name Heatit thermostat
Purpose Home Automation. For flush mounting in a standard wall box
Other features Floor sensor External room sensor Internal room sensor Temperature limiter Power regulator Z-Wave Plus chip, 500 series Weekly program via gateway Setback mode via gateway or pilot wire LED-diode Can be used in connectionwith different NTC-sensors Lock mode/child lock Backlight Calibration 8 associations
Supported network protocols Z-Wave Plus
Chipset ZW5
Accessories included Floor sensor 4mm. Length: 3 m
Technical features Rated voltage: 230V 50/60Hz Max. load: 3600W (resistive load) 750W self-limiting heating cables Max. current: 16A Power usage: 1,5W Power regulator: Time cycle 0-30 min Min/max inst. temp: -200 C to 400 C Min/max oper.temp: 50 C to 400 C Temperature intervals: Floor sensor: 50C to 400C External room sensor: 50C to 400C Hysteresis: 0,30C to 3,00C Default hysteresis: 0,50C Sensor values: 00C 29,1 kOhm 100C 18,6 kOhm 150C 15,1 kOhm 200C 12,2 kOhm 250C 10,0 kOhm Switch: IP class: Single-pole
Type Heating and cooling
Colour of product Black
Dimensions 85x85x50 mm
Special features Heatit Z-Wave is an electronic thermostat for flush mounting in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected to Home Automation systems like Fibaro, POPP, Vera, Zipato and others. The display will show the ambient temperature in the floor. The thermostat is equipped with sensitive cap sense buttons. By lightly pressing the buttons, the display will show the set value. Heatit Z-Wave is equipped with a single-pole switch. The thermostat can handle loads up to 16A/3600W at 230V. If the load is greater than this, the thermostat needs to be connected to a contactor. It can be used with two external temperature sensors. The thermostat has the capacity of up to 8 associations (relays etc.)
Connectivity technology Wireless

Product codes

EAN
7071236011927
Manufacturer code
5430498

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal 

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD parcel locker

Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.

See DPD parcel locker locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

The product is out of stock. For additional availability and preorder information please contact us here.

Product comparison

Close