Home page » Photo»Studio»Studio flashlights»Quadralite Move X 300 studijas zibspuldze 300W/s

Quadralite Move X 300 studijas zibspuldze 300W/s

Main info

Move X stands out for its wide power output adjustment range of 5 f-stops (1/1 1/32) adjustable in 1/10th-stop increments which is quite unique in this price range. Beside this high level of precision, Move X is also rather fast and can recycle in le

Product has been archived

Move X stands out for its wide power output adjustment range of 5 f-stops (1/1 1/32) adjustable in 1/10th-stop increments which is quite unique in this price range. Beside this high level of precision, Move X is also rather fast and can recycle in less than 1,7s even when maximum power output is used. It can also reach very short flash duration of 1/2000s @1/32 of power (t=0.1). Color temperature shift between each flash at given power output level should not be larger than ±200K.

Move X strobes are equipped with a built-in Navigator X wireless system receiver. This feature allows full wireless control and triggering up to 100m. Move X can be controlled by other flashes (for example: Stroboss 60 or Stroboss 36 speedlites), or by Navigator X and X2 radio controllers up to your camera's x-sync speed in manual mode (TTL is not supported). Move X is also equipped with a USB port where Navigator Kit receivers can be attached and flash can be used in the same setup with older Quantuum and Quadralite flashes. There is also a 3,5mm Jack sync port for third party triggers.

Rear panel is equipped with a large backlit LCD screen featuring high visibility at almost any angle. All flash status informations are presented there for user convenience even in bright ambient light. Flash power output can be adjusted by a knob located on the right side of LCD. There is also a set of five buttons delivering easy access to all flash features and functions such as wireless modes, sound signal, etc. Modeling light can be adjusted manually or set proportionally to flash power level.

Quadralite Move X is exceptionally light (approx. 2kg depending on version) and packed into a small housing made of aluminum alloy. Stand bracket is also made of metal providing up/down shift adjustment and can hold quite large light modifiers (Softboxes up to 120cm in diameter).

Move X flash is equipped with a Bowens S-mount and can be used with a large variety of light modifiers supplied by Quadralite or other manufacturers. You can modify the light according to your needs thanks to a wide assortment of sofboxes, reflectors, beauty-dishes, snoots, umbrellas etc.

 

Main features:

  • Flexible and accurate flash power adjustment within the range of 5 f-stops (5EV) in 50 steps (1/1 1/32) every 0.1 EV
  • Short flash duration of 1/2000s (t0.5, at 1/32 of power)
  • Colour temperature consistency through the entire output range (5600K±200K)
  • Short recycling times (1.5s at full power)
  • Integrated Quadralite Navigator X receiver for wireless control and triggering
  • Optical slave triggering and standard sync socket (Jack 6.3mm) for flash synchronization
  • Automatic power reduction while decreasing flash output
  • 150W halogen modeling light can be used in a proportional or manual mode
  • Active cooling (integrated fan)
  • Compatible with the Bowens type mount light modifiers
  • Light and compact housing

 

In the box:

  • Quadralite Move X flash
  • Quadralite 18 cm reflector
  • Power cord
  • Sync cord
  • Glass flashtube cover
  • Plastic protection cap
  • 150W E27 halogen bulb
  • Instruction manual
  • original packaging

 

Consumer warranty:

  • 2 years

Kmpy studyjne błyskowe

Mount BowensMoc 300Temperatura barwowa 5600kZasilanie sieciowe

Product codes

EAN
5901698717315
Manufacturer code
SG_004826

Manufacturer

Manufacturer
GODOX Photo Equipment Co.,Ltd., Fuhai Street 4th Floor of Building 1, 1st to 4th Floor of Building 2, 4th Floor of Building 3,1st to 4th Floor of Building 4, Yaochuan Industrial Zone, Shenzhen, 518103, CN, godox@godox.com
Responsible person in the EU
Next77 sp. z o.o., ul. Bonarka 11, Kraków, 30-415, PL, gpsr@next77.pl

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal 

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD parcel locker

Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.

See DPD parcel locker locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

The product is out of stock. For additional availability and preorder information please contact us here.

Product comparison

Close