Home page » Computers & IT»Servers»Accessories for rack cabinets»Lanberg closed loop thermostat for server cabinets 10A, gray

Lanberg closed loop thermostat for server cabinets 10A, gray

7,99 €

Main info

AK-1505-S - CLOSED-LOOP THERMOSTAT Equipment installed in Rack cabinets, such as servers, systems of emergency power supply, surveillance, CCTV, alarm etc. all require maintaining the temperature at an appropriate, steady level. There is a wide var
Add to cart

Delivery in 7-10 working days

Delivery starting at 0 €

14 14 days return policy when purchasing online

AK-1505-S - CLOSED-LOOP THERMOSTAT


Equipment installed in Rack cabinets, such as servers, systems of emergency power supply, surveillance, CCTV, alarm etc. all require maintaining the temperature at an appropriate, steady level. There is a wide variety of fans, coolers that can help in solving this problem.



But what if the administrator would like to avoid their unnecessary, redundant work, operating costs, thereby extending their working life? Lanberg offers a simple and flexible solution that will easily accomplish this very goal: closed-loop thermostat AK-1505-S.



It enables temperature regulation inside of server rack cabinets by controlling the power supply to cooling equipment and/or products providing more efficient air flow. The device is equipped with a current contact, which is shorted (closed), and thus switches on the connected cooling only when the temperature, set previously by the user, is exceeded.


All this is possible due to the thermo-bimetallic sensor, which mechanically deforms under the influence of ambient temperature. In combination with the temperature sunken knob, it allows the operation of thermostat to be adjusted accordingly to the user's preferences.NORMALLY OPEN (NO) CONTACT:
CLOSED-LOOP, SNAP ACTION

AK-1505-S uses normally open contact to ensure that the device reacts as quickly as possible to changes in the ambient temperature.


The temperature sensor (thermobimetal) is characterized by various coefficients of thermal expansion, using the phenomenon of so-called temperature deformation. As an active element, those sensors have a "strip" installed within the thermostat consisting of two welded "strips" of metal, each with different coefficient of thermal expansion.


The bimetallic “strip” is heated under the influence of the ambient temperature. Heated above a certain temperature, the strip is deformed, creating a contact with the contact point, which closes the electrical circuit and allows the current to flow.


When the temperature of the device or the environment drops to a certain temperature, the bimetallic strip returns to its original state and the electric circuit opens again.
SAFE SOLUTION - UL 94 V-0 FLAMMABILITY RATING

UL 94 is a standard used by American Underwriters Laboratories that tests the flammability and fire safety of plastic materials. The UL 94 V test (vertical burning) tests the burning behavior of a vertically positioned plastic elements. To achieve UL 94 V-0 flammability class, a given material has to fulfill the following requirements:

1) For each of the 5 samples, the incandescence time will not exceed 30 seconds,
2) For each of the 5 samples, burning pieces will not tear off or fall off, causing the cotton, placed below the tested material to ignite,
3) None of the 5 tested samples will burn or incandesce up to the surface contact-point,
4) Total burning time in 10 attempts of ignition will not exceed 50 seconds,
5) None of the 5 tested samples will show flame formation for more than 10 seconds after removal of the fire source.

The housing of thermostat AK-1505-S is made of high-quality plastic with UL 94 V-0 fire resistance class, confirmed in laboratory tests by issuing an appropriate document. The use
of this type of material guarantees that in the event of a fire the device will not be a source of additional fire. The use of products with low or limited flammability risk is an extremely important aspect when designing the server, control and electrical cabinets of today.MULTIPLE WAYS OF INSTALLATION

In addition to the standard clips (located on the back of the housing) dedicated for mounting on a DIN 35mm rail, AK-1505-S thermostat is also equipped with an additional removable flat, powder coated, black ,,mounting ear'' with a thickness of 1.0 mm, compatible with use the RACK mounting standard.



As an upside of the flat construction, the user receives full and unrestricted installation potential. Thermostat can be mounted on the left- and right-hand side, on the front or in the back of any vertical rack-mounted installation rail. Moreover, this product can also be turned upside down (180 degrees rotation) and mounted in gaps, smaller than a standard RACK space. Lastly, with the use of the mounting ear, installation is even more flexible, because of the mounting holes, enabling the thermostat to be fitted on both sides of the mounting ear.



This solution, in effect, allows full freedom in terms of user's approach to the method of thermostat installation. With Lanberg, thermostat installation has never been easier.

WIDE SELECTION OF ACCESSORIES


To best meet the market expectations, Lanberg, in addition to the thermostat, has provided users with numerous accessories in the box, facilitating installation and the overall operation of the device, increasing its added value. Inside of the packaging users can find the following, additional accessories:


  • Mounting eye in the form of a flat black steel plate, 1.0mm, ~2.5 U, for use in the RACK standard,

  • Terminal block with 3 contacts up to 10 A, for better cable organizationi,

  • 2 washers for nuts of terminal block screws, for preventing the steel plate from scratching,

  • 2 M6 screws and cage nuts, for attaching the ear to the vertical mounting rails in the RACK standard,

  • 2 M6 screw plastic washers for better aesthetics and appearance,

  • 8 cm transparent cable tie, for electric cable organization.

Dimensions and weights

Gross weight
0.1 kg
Package width
6.78 cm
Package height
9.73 cm
Package length
4.3 cm

Product codes

EAN
5901969421637
Manufacturer code
AK-1505-S

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal 

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD parcel locker

Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.

See DPD parcel locker locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

The product can only be ordered from our online store and it takes from 7-10 working days for delivery within Estonia.

Product comparison

Close