Vabandage, tooteandmed on tõlkimisel. Kui vajate toote võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel info@photopoint.ee. Saadame teile kiirelt soovitud tõlke.

<b>A4-H2O</b><br>The A4-H2O is an 11-liter small form factor case, a collaboration project with DAN Cases. Based on the original DAN A4-SFX case sandwich layout concept, the A4-H2O continues the minimalist and compact form factor with improved hardware compatibility (including AIO water cooling) and simplifies installation.<br><br><b>A TRIBUTE TO SFF</b><br>The A4-H2O is an 11-liter small form factor case, a collaboration project with DAN Cases. Based on the original DAN A4-SFX case sandwich layout concept, the A4-H2O continues the minimalist and compact form factor with improved hardware compatibility (including AIO water cooling) and simplifies installation. <br><br><b>11-Liter Form Factor</b><br>At only 11 liters, the A4-H2O is one of the smallest cases on the market that supports triple-slot GPU and clearance for 240 AIO water cooling.<br><br><b>SIZE COMPARISION</b><br>The A4-H20 is smaller in size than most consoles, and the minimalist design suits any living space or any entertainment center to enjoy games or movies.<br><br><br><b>Minimalist Design – Black or Silver</b><br>A minimalist design, the A4-H2O has premium aluminum exterior with ventilation from almost most sides. The A4-H2O is available in black or silver.<br><br><b>For Desktop</b><br>Small footprint of the A4-H20 fits on any desktop without taking up too much space for you to keep your space clean and spacious to game or work. <br><br><b>Sandwich Layout Design</b><br>The sandwich layout allows for a triple-slot GPU to fit into the compact size case. Matched with a PCIe Gen. 3 or Gen. 4 riser cable, the GPU is located behind the motherboard and leaves room for a 240mm radiator at the top of the case. Bottom, side, and top mesh panels ensure that the components get cooled directly with fresh air intake.<br><br><b>Easy AIO Installation</b><br>A removable bracket at the top makes the installation of radiators up to 240mm in length much easier. The top compartment accommodates a fan radiator combo of up to 55mm in thickness.<br><br><b>Supports SFX, SFX-L Power Supply</b><br>A removable mounting bracket is designed to support SFX and SFX-L power supplies. A power cord extension is also included and pre-routed to avoid interfering with other hardware.<br><br><b>Fully Removable Panels</b><br>Front, side, top and bottom panels can all be removed easily to provide easier access for installation and/or cable management.<br><br><b>Well Ventilated</b><br>Aside from the front panel, the top, sides and back of the A4-H2O are well ventilated with fine mesh which allows fresh air intake to enter the case.<br><br><b>PCIe-3.0 and PCIe 4.0</b><br>The A4-H2O includes a PCIe Gen.3 or PCIe Gen. 4 riser cable, to vertically mount the GPU and place it behind the motherboard. The PCIe 4.0 riser cable supports transfer rate of 16GT/s (double the speed of PCIe 3.0). PCIe Gen.4 riser cables are backwards compatible with PCIe Gen 3.<br><br><b>IO and Power</b><br>Located on the left side of the case inside a recessed cutout, the front IO includes a USB 3.1 Type-C (internal Key-A) port, a Mic port, an HD-Audio port, and a USB 3.0 Type-A port (internal 19pin). At the top of the recess is a premium-grade power button.<br><br><b>Triple-slot GPU Compatible</b><br>Removing the front panel provides a wide opening at the front to insert larger graphics card into the case with ease. The spacious interior supports a triple-slot graphics card of up to 322mm.<br><br><b>Optimized airflow for 2 slots GPUs</b><br>The extra standoffs helps pushing a two slot GPU toward the side panel in order to exhaust or intake fresh air directly out of the chassis.<br><br><b>Removable Bottom Panel – Cable Management & Storage</b><br>The removable bottom panel provides additional access to the inside of the case and makes for easier cable management. A 2.5” SSD drive can also be attached onto the bottom panel.<br><br><b>A Dan Cases Collaboration</b><br>The A4-H2O, is an update to the popular DAN A4-SFX case with added water cooling support. This is a special collaboration with Daniel Hansen from Dan Cases. The A4-H2O is manufactured and sold by LIAN LI.<br><br><br><br><br><br><br><br><br><br><br>Lian Li A4-H2O A4. Form factor: Small Form Factor (SFF), Type: PC, Product colour: Silver. Supported power supply form factors: SFX, SFX-L. Side fans diameters supported: 120 mm, Top radiator sizes supported: 240 mm. SSD form factor: 2.5". Width: 140 mm, Depth: 326 mm, Height: 244 mm