Kolink Void X Midi Tower Black

118-C1162453994

Põhiinfo

Lisa võrdlusesse

Toode on arhiivis, kuvatakse vaid informatiivsel eesmärgil.

Tootefotod

Ülevaade
Tooteandmed

Vabandage, tooteandmed on tõlkimisel. Kui vajate toote võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel info@photopoint.ee. Saadame teile kiirelt soovitud tõlke.

The Void X is the next case in the popular Void series from Kolink. The Void X has a striking front panel, with a pair of triangular ARGB infinity mirror panels, accented by a pair of ARGB LED strips, which results in an aesthetically pleasing case. The Void X has impressive hardware support too, including dual radiator support, vertical GPU support, E-ATX Motherboard support and much more! Kolink Void X: Combining aesthetics & cooling options The Kolink Void X ARGB comes with a 120mm ARGB PWM fan installed at the rear. The ARGB infinity mirrors and front ARGB LED strips, plus the rear fan, can be controlled via connection to your motherboards 3-Pin 5VDG connector using the applicable motherboard software, or via the reset/RGB switch on the I/O panel. Alongside the pre-installed fan, there is space to install 3 x 120mm or 2 x 140mm fans at the front & 2 x 120mm/140mm fans on the roof. Users are also free to install up to a 360mm radiator in the front, plus a 240mm radiator in the roof. A full tempered glass side panel shows off your system build in style, with ventilation on both sides of the front panel. The Kolink Void X ARGB: Hardware orientated The interior comes entirely in black, with a PSU shroud that only adds to the sleek and unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDDs in the HDD cage provided. Alternatively, 2.5" SSDs can be installed here, or next to the motherboard. The motherboard tray and PSU shroud both offer numerous openings for optimum cable management, with up to 24mm cable management space. Underneath the case is a removable dust filter suitable for a full sized ATX PSU. Graphics cards can be up to 36cm long and CPU coolers up to 17.5cm tall. Additionally, the I/O panel located at the front possesses a pair of USB3.0 Type-A ports as well as two USB2.0 ports, HD-Audio, Mic & a reset/RGB button.Kolink Void X. Form factor: Midi Tower, Type: PC, Product colour: Black. Supported power supply form factors: ATX. Front fans diameters supported: 120,140 mm, Rear fans diameters supported: 120 mm, Top fans diameters supported: 120,140 mm. Supported HDD sizes: 2.5,3.5". Width: 210 mm, Depth: 415 mm, Height: 453 mm

Mõõtmed ja kaalud

Pakendi laius

278 cm

Pakendi kõrgus

508 cm

Pakendi pikkus

495 cm

Toote koodid

EAN

5999094003903

Tootja kood

PGW-CH-KOL-064

Kuidas kaup minuni jõuab?

Alates 99 € tellimuste transport on Eesti-siseselt tasuta. Toote täpsemat tarneaega vaata vahelehelt "Saadavus".

Selle toote puhul saad valida ühe järgmistest tarneviisidest:

Photopointi kauplusesse

Väiksemate toodete puhul on mugav minna kaubale järele Photopointi esinduskauplusesse. Nii on kauba kättesaamine Sinu jaoks täiesti tasuta, sest kauplusesse tellides ei lisandu postikulu ka siis, kui tellimus jääb alla 99 €. Kauba kauplusesse jõudmisest antakse Sulle teada e-kirja teel.

Photopointi kauplused asuvad Tallinnas ja Tartus. Täpsemalt saad poodide asukohti ja kontaktandmeid vaadata siit.

Kulleriga koju või kontorisse

Kulleriga saad kauba tellida koju, kontorisse või mujale, kus kauba kätte toimetamise ajal viibid. Kaup toimetatakse aadressile tööpäevadel kella 08:00-17:00.

Enne kauba kohale jõudmist helistab kuller kontaktile. Kaupa "koju" tellides hoolitse, et telefon oleks käepärast ning volitatud isik kauba kohale jõudmise ajal sihtkohas seda vastu võtmas. Eriti just suuremate esemete tellimisel palume arvestada, et kuller toimetab kauba vaid välisukseni.

Toode on hetkel otsas. Lisainfot saadavuse ja ettetellimise kohta saad küsida, võttes meiega ühendust siin.