Pealeht » Arvuti & IT»Lisaseadmed»UPS tööjaamadele»UPS RACK 19" ARMAC ON-LINE 1000VA LCD 4X IEC C13 OUTLETS METAL CASE

UPS RACK 19" ARMAC ON-LINE 1000VA LCD 4X IEC C13 OUTLETS METAL CASE

Põhiinfo

Armac Rack On-line series UPS - R/1000I/ONL was designed for demanding users who want to safely maintain the work of electronic equipment within 19” Rack cabinet (and not only) that consumes vast amounts of energy in the event of a power outage. Pa

Toode on arhiivis, kuvatakse vaid informatiivsel eesmärgil.

Vabandage, tooteandmed on tõlkimisel. Kui vajate toote võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel info@photopoint.ee. Saadame teile kiirelt soovitud tõlke.


Armac Rack On-line series UPS - R/1000I/ONL was designed for demanding users who want to safely maintain the work of electronic equipment within 19” Rack cabinet (and not only) that consumes vast amounts of energy in the event of a power outage.

Paused operation, failure of electronic devices can cause not only severe financial losses but also the loss of essential data. That is why it is worth investing in the UPS model R/1000I/ONL, which will prevent many unpleasant effects of potential overvoltage.

DEDICATED FOR 19" RACK SERVER CABINETS

The purpose of uninterruptible power supplies from the Rack On-line series is to ensure security of equipment in server, IT rooms, etc. Dedicated to 19" Rack server cabinets, the R/1000I/ONL model provides comprehensive protection against overvoltages, while regulating the voltage of the powered device and maintaining its operation in the event of a power outage.

IMMEDIATE RESPONSE TO AN INTERRUPTION IN THE POWER SUPPLY

R/1000I/ONL is a high-quality uninterruptible power supply with On-line topology. The device operates in continuous mode, which means that in the event of a power failure it does not have to switch to battery operation; The UPS immediately starts running on battery, without any delay, significantly reducing the risk of damage to the connected device.

EFFICIENT, FUNCTIONAL SOLUTION

Uninterruptible power supply model R/1000I/ONL was created for the most demanding tasks within 19” Rack cabinets, such as supporting the work of workstations, servers or high energy consumption network/surveillance systems. The UPS can perform such hard work due to the use of more efficient 9Ah batteries, with a Power Factor of 0.8. What is more, this model has 4 IEC 320 C13 output sockets, with which it can protect several devices at once.

Due to the nature of its operation (Pure sine wave during battery operation), the UPS can be used with devices with an electric motor or heater, e.g., laser printers, scanners, garage and entry gates, electric roller blinds, central heating furnaces.

CONVENIENT OPERATION MONITORING SYSTEM

The Armac uninterruptible power supply communicates via both the USB and the RS-232 port.
Both of these methods allow you to connect the UPS to the PC and issue commands or monitor the operation of the device using PowerManager II software. It is a convenient and straightforward way to ensure proper protection for valuable equipment.

The RS-232 port gives users more room for maneuver in the field of UPS management.

VARIOUS INSTALLATION POSSIBILITIES AND HELPFUL ASSEMBLY ACCESSORIES INCLUDED

The device can be mounted inside a 19" rack cabinet in two ways: using just the mounting ears (included with the product) or with the help of additional Armac' mounting rail set - R/0019, recommended installation option due to the better stability and security of Battery Pack.

Also included with the UPS are unique stands, allowing the device to be installed vertically, outside the Rack cabinet.

In the box, apart from mounting ears for 19" Rack cabinets, you can also find a supply of M6 screws and cage nuts. Both products are made of a metal alloy that guarantees their reliability. There is no question of bent accessories that instead of helping, e.g., hinder the installation within the server cabinet.

ARMAC UPS SAFETY - OVERLOAD PROTECTION

Uninterruptible power supply R/1000I/ONL also copes well with challenging tasks in the office, server room or IT workshop, such as protection of workstations, servers, or network or monitoring systems with high energy consumption. The UPS has 4 IEC 320 C13 output sockets, allowing many devices to be connected to it.

Importantly, each Armac emergency power supply system is equipped with an overload protection module. When the UPS is overloaded during its regular operation, the device will automatically safely shut down the power supply to the equipment connected to it. This solution strengthens the safety and comfort of using Armac uninterruptible power supplies.

MICROPROCESSOR CONTROL – EFFECTIVE SURVEILLANCE OF SENSITIVE DEVICES

The proper work of the emergency power supply is supervised by a specially built-in processor that controls the parameters of the device itself, its correct operation and the power supply of connected devices. The technology used in the UPS also ensures automatic battery charging in Stand-By mode, as well as automatic start-up feature after the power supply returns.

AUTOMATIC VOLTAGE STABILIZER – AVR

With the implemented of AVR feature in R/1000I/ONL, standard solutions commonly found in
Line-interactive UPS are improved. That is due to the use of the network autotransformer, which regulates the voltage transmitted to devices connected to the UPS on an ongoing basis. AVR, therefore, provides comfort and high performance.

• If the voltage is about 255V or higher, then UPS will transmit the AC power to the autotransformer (AVR) and the output voltage will be within the allowable range from 195 to 255V.

• If the voltage is approximately 195 V or less, then UPS will transmit the AC power to the autotransformer (AVR) and the output voltage will be within the allowable range from 195V to 255V.

Toote koodid

EAN
5901969421422
Tootja kood
R/1000I/ONL

Kuidas kaup minuni jõuab?

Alates 99 € tellimuste transport on Eesti-siseselt tasuta. Toote täpsemat tarneaega vaata vahelehelt "Saadavus".  

Selle toote puhul saad valida ühe järgmistest tarneviisidest:

Photopointi kauplusesse

Väiksemate toodete puhul on mugav minna kaubale järele Photopointi esinduskauplusesse. Nii on kauba kättesaamine Sinu jaoks täiesti tasuta, sest kauplusesse tellides ei lisandu postikulu ka siis, kui tellimus jääb alla 99 €. Kauba kauplusesse jõudmisest antakse Sulle teada e-kirja teel.

Photopointi kauplused asuvad Tallinnas ja Tartus. Täpsemalt saad poodide asukohti ja kontaktandmeid vaadata siit.

Omniva pakiautomaati

Vali kättesaamise kohaks endale sobivaim Omniva pakiautomaat. Kui pakk automaati jõuab, saadetakse Sulle SMS koos unikaalse koodiga. Mine kohale, sisesta kood automaati ja võta pakk. Nii lihtne ongi. Omniva pakiautomaadid asuvad hoonetest väljas – nii saad pakile järele minna olenemata kellaajast ja kuupäevast. 

Lähima pakiautomaadi saad Photopointi veebipoes valida ostukorvis, tarneviisi juures olevast nimekirjast. Omniva kõikide pakiautomaatide asukohti saad vaadata siit.

SmartPOST pakiautomaati

Ehk on Sinule sobivaimas kohas hoopis SmartPOST pakiautomaat? Kui nii, siis vali Photopointi veebipoes ostukorvis tarneviisiks see sobivaim. Kui pakk automaati jõuab, saadetakse Sulle SMS koos unikaalse koodiga. Mine kohale, sisesta kood automaati ja võta pakk. Kiire ja lihtne.

Kõikide SmartPOST pakiautomaatide asukohti saad vaadata siit.

DPD pakiautomaati

Vaata kindlasti üle ka DPD pakiautomaatide asukohad. Neid on tänaseks juba üle Eesti. Vali Photopointi veebipoes ostukorvis sobiv DPD pakiautomaat ning kui pakk kohale jõuab, saadetakse Sulle SMSiga kood.

DPD pakiautomaatide asukohti saad vaadata siit.

SmartPOST Finland pakiautomaati

Telli kaup endale Soome või saada see enda Soomes elavale sõbrale. SmartPOST Finland pakiautomaadid toimivad sama lihtsalt nagu Eestisisesed automaadid. Vali Photopointi veebipoes ostukorvis sobiv SmartPOST Finland automaat. Kui pakk kohale jõuab, saadetakse saajale SMS koos unikaalse koodiga. Mine kohale, sisesta kood automaati ja võta pakk.

SmartPOST Finland automaatide asukohti saad vaadata siit.

Matkahuolto väljastuspunkti Soomes

Telli kaup Soome või saada see enda Soomes elavale sõbrale. Vali Photopointi veebipoes ostukorvis sobiv Matkahuolto väljastuspunkt ning kui pakk kohale jõuab, saadetakse Sulle SMS või e-mail teavitusega. Mine kohale, näita isikut tõendavat dokumenti ja võta pakk.

Matkahuolto teeninduspunkte saad vaadata siit.

Kulleriga koju või kontorisse

Kulleriga saad kauba tellida koju, kontorisse või mujale, kus kauba kätte toimetamise ajal viibid. Kaup toimetatakse aadressile tööpäevadel kella 08:00-17:00.

Enne kauba kohale jõudmist helistab kuller kontaktile. Kaupa "koju" tellides hoolitse, et telefon oleks käepärast ning volitatud isik kauba kohale jõudmise ajal sihtkohas seda vastu võtmas. Eriti just suuremate esemete tellimisel palume arvestada, et kuller toimetab kauba vaid välisukseni. 

Toode on hetkel otsas. Lisainfot saadavuse ja ettetellimise kohta saad küsida, võttes meiega ühendust siin.

Avasta veel

Tootevõrdlus

Sulge